OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
10 model = "GL-MT300N";
11  
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15  
16 gpio-leds {
17 compatible = "gpio-leds";
18  
19 wan {
20 label = "gl-mt300n:wan";
21 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
22 };
23  
24 lan {
25 label = "gl-mt300n:lan";
26 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
27 };
28  
29 wlan {
30 label = "gl-mt300n:wlan";
31 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
32 };
33  
34 };
35  
36 gpio-keys-polled {
37 compatible = "gpio-keys-polled";
38 #address-cells = <1>;
39 #size-cells = <0>;
40 poll-interval = <20>;
41 reset {
42 label = "reset";
43 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
45 };
46  
47 BTN_0 {
48 label = "BTN_0";
49 gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
50 linux,code = <BTN_0>;
51 };
52  
53 BTN_1 {
54 label = "BTN_1";
55 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
56 linux,code = <BTN_1>;
57 };
58 };
59 };
60  
61 &gpio0 {
62 status = "okay";
63 };
64  
65 &gpio1 {
66 status = "okay";
67 };
68  
69 &gpio2 {
70 status = "okay";
71 };
72  
73 &gpio3 {
74 status = "okay";
75 };
76  
77 &spi0 {
78 status = "okay";
79  
80 m25p80@0 {
81 #address-cells = <1>;
82 #size-cells = <1>;
83 compatible = "jedec,spi-nor";
84 reg = <0>;
85 spi-max-frequency = <10000000>;
86  
87 partition@0 {
88 label = "u-boot";
89 reg = <0x0 0x30000>;
90 };
91  
92 partition@30000 {
93 label = "u-boot-env";
94 reg = <0x30000 0x10000>;
95 read-only;
96 };
97  
98 factory: partition@40000 {
99 label = "factory";
100 reg = <0x40000 0x10000>;
101 read-only;
102 };
103  
104 partition@50000 {
105 label = "firmware";
106 reg = <0x50000 0xf80000>;
107 };
108  
109 partition@ff0000 {
110 label = "art";
111 reg = <0xff0000 0x10000>;
112 };
113 };
114 };
115  
116 &ehci {
117 status = "okay";
118 };
119  
120 &ohci {
121 status = "okay";
122 };
123  
124 &ethernet {
125 mtd-mac-address = <&factory 0x4000>;
126 mediatek,portmap = "wllll";
127 };
128  
129 &wmac {
130 ralink,mtd-eeprom = <&factory 0>;
131 };
132  
133 &pinctrl {
134 state_default: pinctrl0 {
135 gpio {
136 ralink,group = "wled","ephy","i2c";
137 ralink,function = "gpio";
138 };
139 };
140 };