OpenWrt – Blame information for rev 4
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
4 | office | 1 | kirkwood: add nsa310b dtb, a zyxel nsa310 variant |
2 | |||
3 | add support to a nsa310 variant with red/green usb led |
||
4 | and lm85 temp/fan controller |
||
5 | |||
6 | Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> |
||
7 | |||
8 | NOTE: this patch can be upstreamed as-is, LEDE-specific |
||
9 | nand partitions are set in another patch |
||
10 | |||
11 | --- a/arch/arm/boot/dts/Makefile |
||
12 | +++ b/arch/arm/boot/dts/Makefile |
||
13 | @@ -238,6 +238,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ |
||
14 | kirkwood-ns2mini.dtb \ |
||
15 | kirkwood-nsa310.dtb \ |
||
16 | kirkwood-nsa310a.dtb \ |
||
17 | + kirkwood-nsa310b.dtb \ |
||
18 | kirkwood-nsa320.dtb \ |
||
19 | kirkwood-nsa325.dtb \ |
||
20 | kirkwood-openblocks_a6.dtb \ |
||
21 | --- /dev/null |
||
22 | +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts |
||
23 | @@ -0,0 +1,124 @@ |
||
24 | +/dts-v1/; |
||
25 | + |
||
26 | +#include "kirkwood-nsa3x0-common.dtsi" |
||
27 | + |
||
28 | +/* |
||
29 | + * There are at least two different NSA310 designs. This variant has |
||
30 | + * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller. |
||
31 | + */ |
||
32 | + |
||
33 | +/ { |
||
34 | + model = "ZyXEL NSA310b"; |
||
35 | + compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
||
36 | + |
||
37 | + memory { |
||
38 | + device_type = "memory"; |
||
39 | + reg = <0x00000000 0x10000000>; |
||
40 | + }; |
||
41 | + |
||
42 | + chosen { |
||
43 | + bootargs = "console=ttyS0,115200"; |
||
44 | + stdout-path = &uart0; |
||
45 | + }; |
||
46 | + |
||
47 | + ocp@f1000000 { |
||
48 | + pinctrl: pin-controller@10000 { |
||
49 | + pinctrl-names = "default"; |
||
50 | + |
||
51 | + pmx_led_esata_green: pmx-led-esata-green { |
||
52 | + marvell,pins = "mpp12"; |
||
53 | + marvell,function = "gpio"; |
||
54 | + }; |
||
55 | + |
||
56 | + pmx_led_esata_red: pmx-led-esata-red { |
||
57 | + marvell,pins = "mpp13"; |
||
58 | + marvell,function = "gpio"; |
||
59 | + }; |
||
60 | + |
||
61 | + pmx_led_usb_green: pmx-led-usb-green { |
||
62 | + marvell,pins = "mpp15"; |
||
63 | + marvell,function = "gpio"; |
||
64 | + }; |
||
65 | + |
||
66 | + pmx_led_usb_red: pmx-led-usb-red { |
||
67 | + marvell,pins = "mpp16"; |
||
68 | + marvell,function = "gpio"; |
||
69 | + }; |
||
70 | + |
||
71 | + pmx_led_sys_green: pmx-led-sys-green { |
||
72 | + marvell,pins = "mpp28"; |
||
73 | + marvell,function = "gpio"; |
||
74 | + }; |
||
75 | + |
||
76 | + pmx_led_sys_red: pmx-led-sys-red { |
||
77 | + marvell,pins = "mpp29"; |
||
78 | + marvell,function = "gpio"; |
||
79 | + }; |
||
80 | + |
||
81 | + pmx_led_hdd_green: pmx-led-hdd-green { |
||
82 | + marvell,pins = "mpp41"; |
||
83 | + marvell,function = "gpio"; |
||
84 | + }; |
||
85 | + |
||
86 | + pmx_led_hdd_red: pmx-led-hdd-red { |
||
87 | + marvell,pins = "mpp42"; |
||
88 | + marvell,function = "gpio"; |
||
89 | + }; |
||
90 | + |
||
91 | + }; |
||
92 | + |
||
93 | + i2c@11000 { |
||
94 | + status = "okay"; |
||
95 | + |
||
96 | + lm85: lm85@2e { |
||
97 | + compatible = "national,lm85"; |
||
98 | + reg = <0x2e>; |
||
99 | + }; |
||
100 | + }; |
||
101 | + }; |
||
102 | + |
||
103 | + gpio-leds { |
||
104 | + compatible = "gpio-leds"; |
||
105 | + |
||
106 | + green-sys { |
||
107 | + label = "nsa310:green:sys"; |
||
108 | + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
||
109 | + }; |
||
110 | + red-sys { |
||
111 | + label = "nsa310:red:sys"; |
||
112 | + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
||
113 | + }; |
||
114 | + green-hdd { |
||
115 | + label = "nsa310:green:hdd"; |
||
116 | + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
||
117 | + }; |
||
118 | + red-hdd { |
||
119 | + label = "nsa310:red:hdd"; |
||
120 | + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
||
121 | + }; |
||
122 | + green-esata { |
||
123 | + label = "nsa310:green:esata"; |
||
124 | + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||
125 | + }; |
||
126 | + red-esata { |
||
127 | + label = "nsa310:red:esata"; |
||
128 | + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||
129 | + }; |
||
130 | + green-usb { |
||
131 | + label = "nsa310:green:usb"; |
||
132 | + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
||
133 | + }; |
||
134 | + red-usb { |
||
135 | + label = "nsa310:red:usb"; |
||
136 | + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
||
137 | + }; |
||
138 | + green-copy { |
||
139 | + label = "nsa310:green:copy"; |
||
140 | + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
||
141 | + }; |
||
142 | + red-copy { |
||
143 | + label = "nsa310:red:copy"; |
||
144 | + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
||
145 | + }; |
||
146 | + }; |
||
147 | +}; |