OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
10 model = "Asus WL-330N3G";
11  
3 office 12 gpio-leds {
1 office 13 compatible = "gpio-leds";
14  
15 3g {
16 label = "wl-330n3g:blue:3g";
17 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
18 };
19  
20 3g2 {
21 label = "wl-330n3g:red:3g";
22 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
23 };
24  
3 office 25 power {
1 office 26 label = "wl-330n3g:blue:power";
27 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
28 };
29 };
30  
3 office 31 gpio-keys-polled {
1 office 32 compatible = "gpio-keys-polled";
3 office 33 #address-cells = <1>;
34 #size-cells = <0>;
1 office 35 poll-interval = <20>;
36  
37 reset {
38 label = "reset";
39 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_RESTART>;
41 };
42  
43 wps {
44 label = "wps";
45 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
46 linux,code = <KEY_RESTART>;
47 };
48 };
49 };
50  
51 &spi0 {
52 status = "okay";
53  
54 m25p80@0 {
3 office 55 #address-cells = <1>;
56 #size-cells = <1>;
1 office 57 compatible = "jedec,spi-nor";
58 reg = <0>;
59 spi-max-frequency = <10000000>;
60  
3 office 61 partition@0 {
62 label = "u-boot";
63 reg = <0x0 0x30000>;
64 read-only;
65 };
1 office 66  
3 office 67 partition@30000 {
68 label = "u-boot-env";
69 reg = <0x30000 0x10000>;
70 read-only;
71 };
1 office 72  
3 office 73 factory: partition@40000 {
74 label = "factory";
75 reg = <0x40000 0x10000>;
76 read-only;
77 };
1 office 78  
3 office 79 partition@50000 {
80 label = "firmware";
81 reg = <0x50000 0x3b0000>;
1 office 82 };
83 };
84 };
85  
86 &pinctrl {
87 state_default: pinctrl0 {
88 gpio {
89 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
90 ralink,function = "gpio";
91 };
92 };
93 };
94  
95 &ethernet {
96 mtd-mac-address = <&factory 0x4>;
97 };
98  
99 &esw {
100 mediatek,portmap = <0x3e>;
101 };
102  
103 &wmac {
104 ralink,mtd-eeprom = <&factory 0>;
105 };
106  
107 &otg {
108 status = "okay";
109 };