OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "tenda,w150m", "ralink,rt3050-soc";
10 model = "Tenda W150M";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
3 office 17 #address-cells = <1>;
18 #size-cells = <1>;
1 office 19  
3 office 20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
1 office 25  
3 office 26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
1 office 31  
3 office 32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
1 office 37  
3 office 38 partition@50000 {
39 label = "firmware";
40 reg = <0x50000 0x3c8000>;
1 office 41 };
42 };
43  
3 office 44 gpio-leds {
1 office 45 compatible = "gpio-leds";
46  
47 3grouter {
48 label = "w150m:blue:3grouter";
49 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
50 };
51  
3 office 52 ap {
1 office 53 label = "w150m:blue:ap";
54 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
55 };
56  
57 wisprouter {
58 label = "w150m:blue:wisprouter";
59 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
60 };
61  
62 wirelessrouter {
63 label = "w150m:blue:wirelessrouter";
64 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
65 };
66  
67 3g {
68 label = "w150m:blue:3g";
69 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
70 };
71  
72 wpsreset {
73 label = "w150m:blue:wpsreset";
74 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
75 };
76 };
77  
3 office 78 gpio-keys-polled {
1 office 79 compatible = "gpio-keys-polled";
3 office 80 #address-cells = <1>;
81 #size-cells = <0>;
1 office 82 poll-interval = <20>;
83  
84 reset {
85 label = "reset";
86 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_RESTART>;
88 };
89  
90 mode {
91 label = "mode";
92 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
93 linux,code = <BTN_0>;
94 };
95 };
96 };
97  
98 &pinctrl {
99 state_default: pinctrl0 {
100 gpio {
101 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
102 ralink,function = "gpio";
103 };
104 };
105 };
106  
107 &ethernet {
108 mtd-mac-address = <&factory 0x4>;
109 };
110  
111 &esw {
112 mediatek,portmap = <0x2f>;
113 };
114  
115 &wmac {
116 ralink,mtd-eeprom = <&factory 0>;
117 };