OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
10 model = "UPVEL UR-326N4G";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
3 office 17 #address-cells = <1>;
18 #size-cells = <1>;
1 office 19  
3 office 20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
1 office 25  
3 office 26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
1 office 31  
3 office 32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
1 office 37  
3 office 38 partition@50000 {
39 label = "firmware";
40 reg = <0x50000 0x3b0000>;
1 office 41 };
42 };
43  
3 office 44 gpio-leds {
1 office 45 compatible = "gpio-leds";
46  
47 3g {
48 label = "ur-326n4g:green:3g";
49 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
50 };
51  
52 gateway {
53 label = "ur-326n4g:green:gateway";
54 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
55 };
56  
57 ap {
58 label = "ur-326n4g:green:ap";
59 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
60 };
61  
3 office 62 wps {
1 office 63 label = "ur-326n4g:green:wps";
64 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
65 };
66  
67 station {
68 label = "ur-326n4g:green:station";
69 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
70 };
71 };
72  
3 office 73 gpio-keys-polled {
1 office 74 compatible = "gpio-keys-polled";
3 office 75 #address-cells = <1>;
76 #size-cells = <0>;
1 office 77 poll-interval = <20>;
78  
79 reset_wps {
80 label = "reset_wps";
81 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_RESTART>;
83 };
84  
85 mode {
86 label = "mode";
87 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
88 linux,code = <BTN_0>;
89 };
90 };
91 };
92  
93 &pinctrl {
94 state_default: pinctrl0 {
95 gpio {
96 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
97 ralink,function = "gpio";
98 };
99 };
100 };
101  
102 &ethernet {
103 mtd-mac-address = <&factory 0x4004>;
104 };
105  
106 &esw {
107 mediatek,portmap = <0x2f>;
108 };
109  
110 &wmac {
111 ralink,mtd-eeprom = <&factory 0>;
112 };
113  
114 &otg {
115 status = "okay";
116 };