OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
10 model = "Planex MZK-W300NH2";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
3 office 17 #address-cells = <1>;
18 #size-cells = <1>;
1 office 19  
3 office 20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
1 office 25  
3 office 26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
1 office 31  
3 office 32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
1 office 37  
3 office 38 partition@3e0000 {
39 label = "cimage";
40 reg = <0x3e0000 0x20000>;
41 read-only;
42 };
1 office 43  
3 office 44 partition@50000 {
45 label = "firmware";
46 reg = <0x50000 0x390000>;
1 office 47 };
48 };
49  
3 office 50 gpio-leds {
1 office 51 compatible = "gpio-leds";
52  
3 office 53 power {
1 office 54 label = "mzk-w300nh2:green:power";
55 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
56 };
57  
58 wlan {
59 label = "mzk-w300nh2:amber:wlan";
60 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
61 };
62  
63 wps {
64 label = "mzk-w300nh2:amber:wps";
65 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
66 };
67 };
68  
3 office 69 gpio-keys-polled {
1 office 70 compatible = "gpio-keys-polled";
3 office 71 #address-cells = <1>;
72 #size-cells = <0>;
1 office 73 poll-interval = <20>;
74  
75 wps {
76 label = "wps";
77 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_WPS_BUTTON>;
79 };
80  
81 reset {
82 label = "reset";
83 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_RESTART>;
85 };
86  
87 rt {
88 label = "rt";
89 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
90 linux,code = <BTN_0>;
91 };
92 };
93 };
94  
95 &pinctrl {
96 state_default: pinctrl0 {
97 gpio {
98 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
99 ralink,function = "gpio";
100 };
101 };
102 };
103  
104 &ethernet {
105 mtd-mac-address = <&factory 0x4>;
106 };
107  
108 &esw {
109 mediatek,portmap = <0x2f>;
110 };
111  
112 &wmac {
113 ralink,mtd-eeprom = <&factory 0>;
114 };