OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt2880.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "airlink101,ar670w", "ralink,rt2880-soc";
10 model = "Airlink101 AR670W";
11  
12 cfi@bdc00000 {
13 compatible = "cfi-flash";
14 reg = <0xbc400000 0x800000>;
15 bank-width = <2>;
3 office 16 #address-cells = <1>;
17 #size-cells = <1>;
1 office 18  
3 office 19 u-boot@0 {
20 reg = <0x0 0x30000>;
21 label = "u-boot";
22 read-only;
23 };
1 office 24  
3 office 25 factory: factory@30000 {
26 reg = <0x30000 0x10000>;
27 label = "factory";
28 read-only;
29 };
1 office 30  
3 office 31 firmware@40000 {
32 reg = <0x40000 0x3c0000>;
33 label = "firmware";
1 office 34 };
35 };
36  
3 office 37 gpio-leds {
1 office 38 compatible = "gpio-leds";
39  
3 office 40 status {
1 office 41 label = "ar670w:green:power";
42 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
43 };
44  
45 wpsblue {
46 label = "ar670w:blue:wps";
47 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
48 };
49 };
50  
3 office 51 gpio-keys-polled {
1 office 52 compatible = "gpio-keys-polled";
3 office 53 #address-cells = <1>;
54 #size-cells = <0>;
1 office 55 poll-interval = <100>;
56  
57 wps {
58 label = "wps";
59 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
60 linux,code = <KEY_WPS_BUTTON>;
61 };
62  
63 reset {
64 label = "reset";
65 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
66 linux,code = <KEY_RESTART>;
67 };
68 };
69 };
70  
71 &gpio0 {
72 status = "okay";
73 };
74  
75 &pinctrl {
76 state_default: pinctrl0 {
77 gpio {
78 ralink,group = "i2c", "spi", "uartlite";
79 ralink,function = "gpio";
80 };
81 };
82 };
83  
84 &ethernet {
85 status = "okay";
86 mtd-mac-address = <&factory 0x2004>;
87  
88 port@0 {
89 phy-handle = <&phy0>;
90 phy-mode = "mii";
91 };
92  
93 mdio-bus {
94 status = "okay";
95  
96 phy0: ethernet-phy@0 {
97 phy-mode = "mii";
98 reg = <0>;
99 };
100 };
101 };
102  
103 &wmac {
104 status = "okay";
105 ralink,mtd-eeprom = <&factory 0x2000>;
106 };