OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
10 model = "Edimax 3g-6200n";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
3 office 17 #address-cells = <1>;
18 #size-cells = <1>;
1 office 19  
3 office 20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
1 office 25  
3 office 26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
1 office 31  
3 office 32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
1 office 37  
3 office 38 partition@3e0000 {
39 label = "cimage";
40 reg = <0x3e0000 0x20000>;
41 read-only;
42 };
1 office 43  
3 office 44 partition@50000 {
45 label = "firmware";
46 reg = <0x50000 0x390000>;
1 office 47 };
48 };
49  
3 office 50 gpio-leds {
1 office 51 compatible = "gpio-leds";
52  
3 office 53 power {
1 office 54 label = "3g-6200n:green:power";
55 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
56 };
57  
58 wlan {
59 label = "3g-6200n:amber:wlan";
60 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
61 };
62  
63 3g {
64 label = "3g-6200n:blue:3g";
65 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
66 };
67 };
68  
3 office 69 gpio-keys-polled {
1 office 70 compatible = "gpio-keys-polled";
3 office 71 #address-cells = <1>;
72 #size-cells = <0>;
1 office 73 poll-interval = <20>;
74  
75 reset {
76 label = "reset";
77 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_RESTART>;
79 };
80  
81 rfkill {
82 label = "wlanswitch";
83 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_RFKILL>;
85 };
86 };
87 };
88  
89 &pinctrl {
90 state_default: pinctrl0 {
91 gpio {
92 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
93 ralink,function = "gpio";
94 };
95 };
96 };
97  
98 &ethernet {
99 mtd-mac-address = <&factory 0x4>;
100 };
101  
102 &esw {
103 mediatek,portmap = <0x2f>;
104 };
105  
106 &wmac {
107 ralink,mtd-eeprom = <&factory 0>;
108 };
109  
110 &otg {
111 status = "okay";
112 };