OpenWrt – Blame information for rev 3
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
1 | office | 1 | --- a/arch/arm/dts/Makefile |
2 | +++ b/arch/arm/dts/Makefile |
||
3 | office | 3 | @@ -261,6 +261,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ |
1 | office | 4 | sun6i-a31-m9.dtb \ |
5 | sun6i-a31-mele-a1000g-quad.dtb \ |
||
6 | sun6i-a31-mixtile-loftq.dtb \ |
||
7 | + sun6i-a31-pangolin.dtb \ |
||
8 | sun6i-a31s-colorfly-e708-q1.dtb \ |
||
9 | sun6i-a31s-cs908.dtb \ |
||
10 | sun6i-a31s-inet-q972.dtb \ |
||
11 | --- a/arch/arm/dts/sun6i-a31.dtsi |
||
12 | +++ b/arch/arm/dts/sun6i-a31.dtsi |
||
3 | office | 13 | @@ -679,6 +679,13 @@ |
14 | allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
||
1 | office | 15 | }; |
16 | |||
17 | + i2c3_pins_a: i2c3@0 { |
||
18 | + allwinner,pins = "PB5", "PB6"; |
||
19 | + allwinner,function = "i2c3"; |
||
3 | office | 20 | + allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
21 | + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
||
1 | office | 22 | + }; |
23 | + |
||
24 | mmc0_pins_a: mmc0@0 { |
||
3 | office | 25 | allwinner,pins = "PF0", "PF1", "PF2", |
1 | office | 26 | "PF3", "PF4", "PF5"; |
27 | --- /dev/null |
||
28 | +++ b/arch/arm/dts/sun6i-a31-pangolin.dts |
||
29 | @@ -0,0 +1,292 @@ |
||
30 | +/* |
||
31 | + * Copyright 2015, Theobroma Systems Design und Consulting GmbH |
||
32 | + * |
||
33 | + * This file is dual-licensed: you can use it either under the terms |
||
34 | + * of the GPL or the X11 license, at your option. Note that this dual |
||
35 | + * licensing only applies to this file, and not this project as a |
||
36 | + * whole. |
||
37 | + * |
||
38 | + * a) This file is free software; you can redistribute it and/or |
||
39 | + * modify it under the terms of the GNU General Public License as |
||
40 | + * published by the Free Software Foundation; either version 2 of the |
||
41 | + * License, or (at your option) any later version. |
||
42 | + * |
||
43 | + * This file is distributed in the hope that it will be useful, |
||
44 | + * but WITHOUT ANY WARRANTY; without even the implied warranty of |
||
45 | + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||
46 | + * GNU General Public License for more details. |
||
47 | + * |
||
48 | + * Or, alternatively, |
||
49 | + * |
||
50 | + * b) Permission is hereby granted, free of charge, to any person |
||
51 | + * obtaining a copy of this software and associated documentation |
||
52 | + * files (the "Software"), to deal in the Software without |
||
53 | + * restriction, including without limitation the rights to use, |
||
54 | + * copy, modify, merge, publish, distribute, sublicense, and/or |
||
55 | + * sell copies of the Software, and to permit persons to whom the |
||
56 | + * Software is furnished to do so, subject to the following |
||
57 | + * conditions: |
||
58 | + * |
||
59 | + * The above copyright notice and this permission notice shall be |
||
60 | + * included in all copies or substantial portions of the Software. |
||
61 | + * |
||
62 | + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
||
63 | + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
||
64 | + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
||
65 | + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
||
66 | + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
||
67 | + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
||
68 | + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||
69 | + * OTHER DEALINGS IN THE SOFTWARE. |
||
70 | + */ |
||
71 | + |
||
72 | +/dts-v1/; |
||
73 | +#include "sun6i-a31.dtsi" |
||
74 | +#include "sunxi-common-regulators.dtsi" |
||
75 | + |
||
76 | +#include <dt-bindings/gpio/gpio.h> |
||
77 | +#include <dt-bindings/pinctrl/sun4i-a10.h> |
||
78 | + |
||
79 | +/ { |
||
80 | + model = "Theobroma Systems A31 Pangolin"; |
||
81 | + compatible = "tsd,a31-pangolin", "allwinner,sun6i-a31"; |
||
82 | + |
||
83 | + aliases { |
||
84 | + serial0 = &uart0; |
||
85 | + serial2 = &uart2; |
||
86 | + spi0 = &spi0; |
||
87 | + spi1 = &spi1; |
||
88 | + spi2 = &spi2; |
||
89 | + spi3 = &spi3; |
||
90 | + }; |
||
91 | + |
||
92 | + chosen { |
||
93 | + stdout-path = "serial2:115200n8"; |
||
94 | + }; |
||
95 | +}; |
||
96 | + |
||
97 | +&ehci0 { |
||
98 | + status = "okay"; |
||
99 | +}; |
||
100 | + |
||
101 | +&ohci0 { |
||
102 | + status = "okay"; |
||
103 | +}; |
||
104 | + |
||
105 | +&ehci1 { |
||
106 | + status = "okay"; |
||
107 | +}; |
||
108 | + |
||
109 | +&ohci1 { |
||
110 | + status = "okay"; |
||
111 | +}; |
||
112 | + |
||
113 | +&ohci2 { |
||
114 | + status = "okay"; |
||
115 | +}; |
||
116 | + |
||
117 | +&gmac { |
||
118 | + pinctrl-names = "default"; |
||
119 | + pinctrl-0 = <&gmac_pins_rgmii_a>; |
||
120 | + phy = <&phy1>; |
||
121 | + phy-mode = "rgmii"; |
||
122 | + snps,reset-gpio = <&pio 0 7 GPIO_ACTIVE_LOW>; |
||
123 | + snps,reset-active-low; |
||
124 | + snps,reset-delays-us = <0 10000 30000>; |
||
125 | + status = "okay"; |
||
126 | + |
||
127 | + phy1: ethernet-phy@4 { |
||
128 | + reg = <4>; |
||
129 | + }; |
||
130 | +}; |
||
131 | + |
||
132 | +&i2c0 { |
||
133 | + pinctrl-names = "default"; |
||
134 | + pinctrl-0 = <&i2c0_pins_a>; |
||
135 | + status = "okay"; |
||
136 | +}; |
||
137 | + |
||
138 | +&i2c1 { |
||
139 | + pinctrl-names = "default"; |
||
140 | + pinctrl-0 = <&i2c1_pins_a>; |
||
141 | + status = "okay"; |
||
142 | +}; |
||
143 | + |
||
144 | +&i2c2 { |
||
145 | + pinctrl-names = "default"; |
||
146 | + pinctrl-0 = <&i2c2_pins_a>; |
||
147 | + status = "okay"; |
||
148 | +}; |
||
149 | + |
||
150 | +&i2c3 { |
||
151 | + pinctrl-names = "default"; |
||
152 | + pinctrl-0 = <&i2c3_pins_a>; |
||
153 | + status = "okay"; |
||
154 | + |
||
155 | + rtc_twi: rtc@6f { |
||
156 | + compatible = "isil,isl1208"; |
||
157 | + reg = <0x6f>; |
||
158 | + }; |
||
159 | + fan: fan@18 { |
||
160 | + compatible = "ti,amc6821"; |
||
161 | + reg = <0x18>; |
||
162 | + cooling-min-state = <0>; |
||
163 | + cooling-max-state = <9>; |
||
164 | + #cooling-cells = <2>; |
||
165 | + }; |
||
166 | +}; |
||
167 | + |
||
168 | +&spi0 { |
||
169 | + status = "okay"; |
||
170 | + |
||
171 | + flash: flash@0 { |
||
172 | + compatible = "spansion,m25p40"; |
||
173 | + spi-max-frequency = <16000000>; |
||
174 | + spi-cpol; |
||
175 | + spi-cpha; |
||
176 | + }; |
||
177 | +}; |
||
178 | + |
||
179 | +&spi1 { |
||
180 | + status = "okay"; |
||
181 | +}; |
||
182 | + |
||
183 | +&ir { |
||
184 | + pinctrl-names = "default"; |
||
185 | + pinctrl-0 = <&ir_pins_a>; |
||
186 | + status = "okay"; |
||
187 | +}; |
||
188 | + |
||
189 | +&mmc0 { |
||
190 | + pinctrl-names = "default"; |
||
191 | + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_pangolin>; |
||
192 | + vmmc-supply = <®_vcc3v0>; |
||
193 | + bus-width = <4>; |
||
194 | + cd-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ |
||
195 | + status = "okay"; |
||
196 | +}; |
||
197 | + |
||
198 | +&mmc0_pins_a { |
||
199 | + /* external pull-ups missing for some pins */ |
||
200 | + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; |
||
201 | +}; |
||
202 | + |
||
203 | +&mmc2 { |
||
204 | + pinctrl-names = "default"; |
||
205 | + pinctrl-0 = <&mmc2_pins_a>; |
||
206 | + vmmc-supply = <®_vcc3v0>; |
||
207 | + bus-width = <8>; |
||
208 | + non-removable; |
||
209 | + status = "okay"; |
||
210 | +}; |
||
211 | + |
||
212 | +&pio { |
||
213 | + mmc0_cd_pin_pangolin: mmc0_cd_pin@0 { |
||
214 | + allwinner,pins = "PC19"; |
||
215 | + allwinner,function = "gpio_in"; |
||
216 | + allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
||
217 | + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; |
||
218 | + }; |
||
219 | + |
||
220 | + leds_pins_pangolin: led_pins@0 { |
||
221 | + allwinner,pins = "PH7", "PC16"; |
||
222 | + allwinner,function = "gpio_out"; |
||
223 | + allwinner,drive = <SUN4I_PINCTRL_20_MA>; |
||
224 | + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
||
225 | + }; |
||
226 | + |
||
227 | + mmc2_pins_a: mmc2@0 { |
||
228 | + allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11", |
||
229 | + "PC12","PC13","PC14","PC15"; |
||
230 | + allwinner,function = "mmc2"; |
||
231 | + allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
||
232 | + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
||
233 | + }; |
||
234 | +}; |
||
235 | + |
||
236 | +&p2wi { |
||
237 | + status = "okay"; |
||
238 | + |
||
239 | + axp221: pmic@68 { |
||
240 | + compatible = "x-powers,axp221"; |
||
241 | + reg = <0x68>; |
||
242 | + interrupt-parent = <&nmi_intc>; |
||
243 | + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
||
244 | + interrupt-controller; |
||
245 | + #interrupt-cells = <1>; |
||
246 | + dcdc1-supply = <&vcc_3v0>; |
||
247 | + dcdc5-supply = <&vcc_dram>; |
||
248 | + |
||
249 | + regulators { |
||
250 | + x-powers,dcdc-freq = <3000>; |
||
251 | + |
||
252 | + vcc_3v0: dcdc1 { |
||
253 | + regulator-always-on; |
||
254 | + regulator-min-microvolt = <3000000>; |
||
255 | + regulator-max-microvolt = <3000000>; |
||
256 | + regulator-name = "vcc-3v0"; |
||
257 | + }; |
||
258 | + |
||
259 | + vdd_cpu: dcdc2 { |
||
260 | + regulator-always-on; |
||
261 | + regulator-min-microvolt = <700000>; |
||
262 | + regulator-max-microvolt = <1320000>; |
||
263 | + regulator-name = "vdd-cpu"; |
||
264 | + }; |
||
265 | + |
||
266 | + vdd_gpu: dcdc3 { |
||
267 | + regulator-always-on; |
||
268 | + regulator-min-microvolt = <700000>; |
||
269 | + regulator-max-microvolt = <1320000>; |
||
270 | + regulator-name = "vdd-gpu"; |
||
271 | + }; |
||
272 | + |
||
273 | + vdd_sys_dll: dcdc4 { |
||
274 | + regulator-always-on; |
||
275 | + regulator-min-microvolt = <1100000>; |
||
276 | + regulator-max-microvolt = <1100000>; |
||
277 | + regulator-name = "vdd-sys-dll"; |
||
278 | + }; |
||
279 | + |
||
280 | + vcc_dram: dcdc5 { |
||
281 | + regulator-always-on; |
||
282 | + regulator-min-microvolt = <1500000>; |
||
283 | + regulator-max-microvolt = <1500000>; |
||
284 | + regulator-name = "vcc-dram"; |
||
285 | + }; |
||
286 | + |
||
287 | + vcc_wifi: aldo1 { |
||
288 | + regulator-min-microvolt = <3300000>; |
||
289 | + regulator-max-microvolt = <3300000>; |
||
290 | + regulator-name = "vcc_wifi"; |
||
291 | + }; |
||
292 | + |
||
293 | + avcc: aldo3 { |
||
294 | + regulator-always-on; |
||
295 | + regulator-min-microvolt = <3000000>; |
||
296 | + regulator-max-microvolt = <3000000>; |
||
297 | + regulator-name = "avcc"; |
||
298 | + }; |
||
299 | + }; |
||
300 | + }; |
||
301 | +}; |
||
302 | + |
||
303 | +&uart0 { |
||
304 | + pinctrl-names = "default"; |
||
305 | + pinctrl-0 = <&uart0_pins_a>; |
||
306 | + status = "okay"; |
||
307 | +}; |
||
308 | + |
||
309 | +&usb1_vbus_pin_a { |
||
310 | + allwinner,pins = "PD23"; |
||
311 | +}; |
||
312 | + |
||
313 | +®_usb1_vbus { |
||
314 | + gpio = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD 23 */ |
||
315 | + status = "okay"; |
||
316 | +}; |
||
317 | + |
||
318 | +&usbphy { |
||
319 | + status = "okay"; |
||
320 | + usb1_vbus-supply = <®_usb1_vbus>; |
||
321 | +}; |
||
322 | --- /dev/null |
||
323 | +++ b/configs/pangolin_defconfig |
||
324 | @@ -0,0 +1,36 @@ |
||
325 | +CONFIG_SUNXI_PANGOLIN=y |
||
326 | +CONFIG_SPL=y |
||
327 | +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII" |
||
328 | +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-pangolin" |
||
329 | +CONFIG_VIDEO_VGA_VIA_LCD=y |
||
330 | +CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" |
||
331 | +CONFIG_ARM=y |
||
332 | +CONFIG_ARCH_SUNXI=y |
||
333 | +CONFIG_MACH_SUN6I=y |
||
334 | +CONFIG_DRAM_CHANNELS=1 |
||
335 | +CONFIG_DRAM_CLK=360 |
||
336 | +CONFIG_DRAM_ZQ=70 |
||
337 | +CONFIG_AXP_DCDC1_VOLT=3300 |
||
338 | +CONFIG_AXP_ALDO1_VOLT=0 |
||
339 | +CONFIG_AXP_ALDO2_VOLT=1800 |
||
340 | +CONFIG_AXP_ALDO3_VOLT=3000 |
||
341 | +CONFIG_AXP_DLDO4_VOLT=3300 |
||
342 | +CONFIG_AXP_ELDO1_VOLT=1200 |
||
343 | +CONFIG_AXP_ELDO2_VOLT=2500 |
||
344 | +CONFIG_AXP_ELDO3_VOLT=3300 |
||
345 | +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 |
||
346 | +CONFIG_CONS_INDEX=3 |
||
347 | +# Vbus gpio for usb1 |
||
348 | +CONFIG_USB1_VBUS_PIN="" |
||
349 | +# No Vbus gpio for usb2 |
||
350 | +CONFIG_USB2_VBUS_PIN="" |
||
351 | +CONFIG_USB=y |
||
352 | +CONFIG_DM_USB=y |
||
353 | +CONFIG_USB_EHCI=y |
||
354 | +CONFIG_USB_KEYBOARD=y |
||
355 | +CONFIG_DM_ETH=y |
||
356 | +CONFIG_CMD_IMLS=n |
||
357 | +CONFIG_ETH_DESIGNWARE=y |
||
358 | +CONFIG_DM_SPI=y |
||
359 | +CONFIG_DM_SPI_FLASH=y |
||
360 | +CONFIG_SUNXI_SPI=y |
||
361 | --- a/arch/arm/mach-sunxi/Kconfig |
||
362 | +++ b/arch/arm/mach-sunxi/Kconfig |
||
3 | office | 363 | @@ -752,6 +752,14 @@ config VIDEO_LCD_PANEL_I2C_SCL |
1 | office | 364 | Set the SCL pin for the LCD i2c interface. This takes a string in the |
365 | format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. |
||
366 | |||
367 | +choice |
||
368 | + prompt "Sunxi Board Variant" |
||
369 | + optional |
||
370 | + |
||
371 | +config SUNXI_PANGOLIN |
||
372 | + bool "Theobroma A31 uQ7 Board" |
||
373 | + |
||
374 | +endchoice |
||
375 | |||
376 | # Note only one of these may be selected at a time! But hidden choices are |
||
377 | # not supported by Kconfig |