OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "netgear,wnce2001", "ralink,rt3052-soc";
10 model = "Netgear WNCE2001";
11  
12 aliases {
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_green;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_green;
17 };
18  
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22  
23 leds {
24 compatible = "gpio-leds";
25  
26 led_power_green: power-green {
27 label = "wnce2001:green:power";
28 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
29 };
30  
31 power-red {
32 label = "wnce2001:red:power";
33 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
34 };
35  
36 wlan-green {
37 label = "wnce2001:green:wlan";
38 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
39 };
40  
41 wlan-red {
42 label = "wnce2001:red:wlan";
43 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
44 };
45 };
46  
47 keys {
48 compatible = "gpio-keys-polled";
49 poll-interval = <20>;
50  
51 reset {
52 label = "reset";
53 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_RESTART>;
55 };
56  
57 wps {
58 label = "wps";
59 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
60 linux,code = <KEY_WPS_BUTTON>;
61 };
62  
63 rt {
64 label = "rt";
65 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
66 linux,code = <BTN_0>;
67 };
68  
69 ap {
70 label = "ap";
71 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
72 linux,code = <BTN_1>;
73 };
74 };
75 };
76  
77 &spi0 {
78 status = "okay";
79  
80 m25p80@0 {
81 compatible = "jedec,spi-nor";
82 reg = <0>;
83 spi-max-frequency = <10000000>;
84  
85 partitions {
86 compatible = "fixed-partitions";
87 #address-cells = <1>;
88 #size-cells = <1>;
89  
90 partition@0 {
91 label = "u-boot";
92 reg = <0x0 0x30000>;
93 read-only;
94 };
95  
96 factory: partition@30000 {
97 label = "factory";
98 reg = <0x30000 0x10000>;
99 read-only;
100 };
101  
102 partition@40000 {
103 label = "config";
104 reg = <0x40000 0x20000>;
105 read-only;
106 };
107  
108 partition@60000 {
109 label = "language";
110 reg = <0x60000 0x30000>;
111 read-only;
112 };
113  
114 partition@90000 {
115 label = "pot";
116 reg = <0x90000 0x10000>;
117 read-only;
118 };
119  
120 partition@a0000 {
121 label = "checksum";
122 reg = <0xa0000 0x10000>;
123 };
124  
125 partition@b0000 {
126 compatible = "denx,uimage";
127 label = "firmware";
128 reg = <0xb0000 0x350000>;
129 };
130 };
131 };
132 };
133  
134 &pinctrl {
135 state_default: pinctrl0 {
136 gpio {
137 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
138 ralink,function = "gpio";
139 };
140 };
141 };
142  
143 &ethernet {
144 mtd-mac-address = <&factory 0x28>;
145 };
146  
147 &wmac {
148 ralink,mtd-eeprom = <&factory 0>;
149 };