OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7628an.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
10 model = "HiWiFi HC5661A";
11  
12 aliases {
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
17 };
18  
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22  
23 memory@0 {
24 device_type = "memory";
25 reg = <0x0 0x8000000>;
26 };
27  
28 leds {
29 compatible = "gpio-leds";
30  
31 led_system: system {
32 label = "hc5661a:blue:system";
33 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
34 };
35 internet {
36 label = "hc5661a:blue:internet";
37 gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
38 };
39 wlan2g {
40 label = "hc5661a:blue:wlan2g";
41 gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
42 };
43 };
44  
45 keys {
46 compatible = "gpio-keys-polled";
47 poll-interval = <20>;
48  
49 reset {
50 label = "reset";
51 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_RESTART>;
53 };
54 };
55 };
56  
57 &pinctrl {
58 state_default: pinctrl0 {
59 gpio {
60 ralink,group = "i2c", "refclk", "wled_an";
61 ralink,function = "gpio";
62 };
63 };
64 };
65  
66 &spi0 {
67 status = "okay";
68  
69 m25p80@0 {
70 compatible = "jedec,spi-nor";
71 reg = <0>;
72 linux,modalias = "m25p80", "w25q128";
73 spi-max-frequency = <10000000>;
74  
75 partitions {
76 compatible = "fixed-partitions";
77 #address-cells = <1>;
78 #size-cells = <1>;
79  
80 partition@0 {
81 label = "u-boot";
82 reg = <0x0 0x30000>;
83 read-only;
84 };
85  
86 partition@30000 {
87 label = "hw_panic";
88 reg = <0x30000 0x10000>;
89 read-only;
90 };
91  
92 factory: partition@40000 {
93 label = "factory";
94 reg = <0x40000 0x10000>;
95 read-only;
96 };
97  
98 partition@50000 {
99 compatible = "denx,uimage";
100 label = "firmware";
101 reg = <0x50000 0xf70000>;
102 };
103  
104 partition@fc0000 {
105 label = "oem";
106 reg = <0xfc0000 0x20000>;
107 read-only;
108 };
109  
110 bdinfo: partition@fe0000 {
111 label = "bdinfo";
112 reg = <0xfe0000 0x10000>;
113 read-only;
114 };
115  
116 partition@ff0000 {
117 label = "backup";
118 reg = <0xff0000 0x10000>;
119 read-only;
120 };
121 };
122 };
123 };
124  
125 &ethernet {
126 mtd-mac-address = <&factory 0x4>;
127 mediatek,portmap = "wllll";
128 };
129  
130 &wmac {
131 status = "okay";
132 };