OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 *
16 */
17  
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
22  
23 / {
24 model = "8devices Jalapeno";
25 compatible = "8dev,jalapeno";
26  
27 soc {
28 rng@22000 {
29 status = "okay";
30 };
31  
32 mdio@90000 {
33 status = "okay";
34 pinctrl-0 = <&mdio_pins>;
35 pinctrl-names = "default";
36 };
37  
38 ess-psgmii@98000 {
39 status = "okay";
40 };
41  
42 counter@4a1000 {
43 compatible = "qcom,qca-gcnt";
44 reg = <0x4a1000 0x4>;
45 };
46  
47 tcsr@1949000 {
48 compatible = "qcom,tcsr";
49 reg = <0x1949000 0x100>;
50 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
51 };
52  
53 tcsr@194b000 {
54 /* select hostmode */
55 compatible = "qcom,tcsr";
56 reg = <0x194b000 0x100>;
57 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
58 status = "okay";
59 };
60  
61 ess_tcsr@1953000 {
62 compatible = "qcom,tcsr";
63 reg = <0x1953000 0x1000>;
64 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
65 };
66  
67 tcsr@1957000 {
68 compatible = "qcom,tcsr";
69 reg = <0x1957000 0x100>;
70 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
71 };
72  
73 usb2: usb2@60f8800 {
74 status = "okay";
75 };
76  
77 usb3: usb3@8af8800 {
78 status = "okay";
79 };
80  
81 crypto@8e3a000 {
82 status = "okay";
83 };
84  
85 watchdog@b017000 {
86 status = "okay";
87 };
88  
89 ess-switch@c000000 {
90 status = "okay";
91 switch_lan_bmp = <0x10>; /* lan port bitmap */
92 };
93  
94 edma@c080000 {
95 status = "okay";
96 };
97 };
98 };
99  
100 &tlmm {
101 mdio_pins: mdio_pinmux {
102 pinmux_1 {
103 pins = "gpio53";
104 function = "mdio";
105 };
106 pinmux_2 {
107 pins = "gpio52";
108 function = "mdc";
109 };
110 pinconf {
111 pins = "gpio52", "gpio53";
112 bias-pull-up;
113 };
114 };
115  
116 serial_pins: serial_pinmux {
117 mux {
118 pins = "gpio60", "gpio61";
119 function = "blsp_uart0";
120 bias-disable;
121 };
122 };
123  
124 spi_0_pins: spi_0_pinmux {
125 pin {
126 function = "blsp_spi0";
127 pins = "gpio55", "gpio56", "gpio57";
128 drive-strength = <2>;
129 bias-disable;
130 };
131 pin_cs {
132 function = "gpio";
133 pins = "gpio54", "gpio59";
134 drive-strength = <2>;
135 bias-disable;
136 output-high;
137 };
138 };
139 };
140  
141 &blsp_dma {
142 status = "okay";
143 };
144  
145 &blsp1_spi1 {
146 pinctrl-0 = <&spi_0_pins>;
147 pinctrl-names = "default";
148 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
149 status = "okay";
150  
151 m25p80@0 {
152 reg = <0>;
153 compatible = "jedec,spi-nor";
154 spi-max-frequency = <24000000>;
155  
156 partitions {
157 compatible = "fixed-partitions";
158 #address-cells = <1>;
159 #size-cells = <1>;
160  
161 partition0@0 {
162 label = "SBL1";
163 reg = <0x00000000 0x00040000>;
164 read-only;
165 };
166 partition1@40000 {
167 label = "MIBIB";
168 reg = <0x00040000 0x00020000>;
169 read-only;
170 };
171 partition2@60000 {
172 label = "QSEE";
173 reg = <0x00060000 0x00060000>;
174 read-only;
175 };
176 partition3@c0000 {
177 label = "CDT";
178 reg = <0x000c0000 0x00010000>;
179 read-only;
180 };
181 partition4@d0000 {
182 label = "DDRPARAMS";
183 reg = <0x000d0000 0x00010000>;
184 read-only;
185 };
186 partition5@e0000 {
187 label = "APPSBLENV"; /* uboot env*/
188 reg = <0x000e0000 0x00010000>;
189 read-only;
190 };
191 partition5@f0000 {
192 label = "APPSBL"; /* uboot */
193 reg = <0x000f0000 0x00080000>;
194 read-only;
195 };
196 partition5@170000 {
197 label = "ART";
198 reg = <0x00170000 0x00010000>;
199 read-only;
200 };
201 };
202 };
203  
204 spi-nand@1 {
205 status = "okay";
206 compatible = "spi-nand";
207 reg = <1>;
208 spi-max-frequency = <24000000>;
209 partitions {
210 compatible = "fixed-partitions";
211 #address-cells = <1>;
212 #size-cells = <1>;
213  
214 partition0@0 {
215 label = "ubi";
216 reg = <0x00000000 0x08000000>;
217 };
218 };
219 };
220 };
221  
222 &blsp1_uart1 {
223 pinctrl-0 = <&serial_pins>;
224 pinctrl-names = "default";
225 status = "okay";
226 };
227  
228 &cryptobam {
229 status = "okay";
230 };
231  
232 &gmac0 {
233 qcom,poll_required = <1>;
234 qcom,poll_required_dynamic = <1>;
235 qcom,phy_mdio_addr = <3>;
236 vlan_tag = <1 0x10>;
237 };
238  
239 &gmac1 {
240 qcom,poll_required = <1>;
241 qcom,poll_required_dynamic = <1>;
242 qcom,phy_mdio_addr = <4>;
243 vlan_tag = <2 0x20>;
244 };
245  
246 &wifi0 {
247 status = "okay";
248 qcom,ath10k-calibration-variant = "8devices-Jalapeno";
249 };
250  
251 &wifi1 {
252 status = "okay";
253 qcom,ath10k-calibration-variant = "8devices-Jalapeno";
254 };
255  
256 &usb3_ss_phy {
257 status = "okay";
258 };
259  
260 &usb3_hs_phy {
261 status = "okay";
262 };
263  
264 &usb2_hs_phy {
265 status = "okay";
266 };