OpenWrt – Blame information for rev 4
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
1 | office | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
2 | |||
3 | #include "qcom-ipq4019.dtsi" |
||
4 | #include <dt-bindings/gpio/gpio.h> |
||
5 | #include <dt-bindings/input/input.h> |
||
6 | #include <dt-bindings/soc/qcom,tcsr.h> |
||
7 | |||
8 | / { |
||
9 | model = "AVM FRITZ!Box 4040"; |
||
10 | compatible = "avm,fritzbox-4040"; |
||
11 | |||
12 | aliases { |
||
13 | led-boot = &power; |
||
14 | led-failsafe = &flash; |
||
15 | led-running = &power; |
||
16 | led-upgrade = &flash; |
||
17 | }; |
||
18 | |||
19 | soc { |
||
20 | rng@22000 { |
||
21 | status = "okay"; |
||
22 | }; |
||
23 | |||
24 | mdio@90000 { |
||
25 | status = "okay"; |
||
26 | }; |
||
27 | |||
28 | ess-psgmii@98000 { |
||
29 | status = "okay"; |
||
30 | }; |
||
31 | |||
32 | tcsr@1949000 { |
||
33 | compatible = "qcom,tcsr"; |
||
34 | reg = <0x1949000 0x100>; |
||
35 | qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; |
||
36 | }; |
||
37 | |||
38 | tcsr@194b000 { |
||
39 | compatible = "qcom,tcsr"; |
||
40 | reg = <0x194b000 0x100>; |
||
41 | qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; |
||
42 | }; |
||
43 | |||
44 | ess_tcsr@1953000 { |
||
45 | compatible = "qcom,tcsr"; |
||
46 | reg = <0x1953000 0x1000>; |
||
47 | qcom,ess-interface-select = <TCSR_ESS_PSGMII>; |
||
48 | }; |
||
49 | |||
50 | tcsr@1957000 { |
||
51 | compatible = "qcom,tcsr"; |
||
52 | reg = <0x1957000 0x100>; |
||
53 | qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; |
||
54 | }; |
||
55 | |||
56 | usb2@60f8800 { |
||
57 | status = "okay"; |
||
58 | }; |
||
59 | |||
60 | usb3@8af8800 { |
||
61 | status = "okay"; |
||
62 | }; |
||
63 | |||
64 | crypto@8e3a000 { |
||
65 | status = "okay"; |
||
66 | }; |
||
67 | |||
68 | watchdog@b017000 { |
||
69 | status = "okay"; |
||
70 | }; |
||
71 | |||
72 | qca8075: ess-switch@c000000 { |
||
73 | status = "okay"; |
||
74 | |||
75 | #gpio-cells = <2>; |
||
76 | gpio-controller; |
||
77 | |||
78 | enable-usb-power { |
||
79 | gpio-hog; |
||
80 | line-name = "enable USB3 power"; |
||
81 | gpios = <7 GPIO_ACTIVE_HIGH>; |
||
82 | output-high; |
||
83 | }; |
||
84 | }; |
||
85 | |||
86 | edma@c080000 { |
||
87 | status = "okay"; |
||
88 | }; |
||
89 | }; |
||
90 | |||
91 | keys { |
||
92 | compatible = "gpio-keys"; |
||
93 | |||
94 | wlan { |
||
95 | label = "wlan"; |
||
96 | gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; |
||
97 | linux,code = <KEY_RFKILL>; |
||
98 | }; |
||
99 | |||
100 | wps { |
||
101 | label = "wps"; |
||
102 | gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; |
||
103 | linux,code = <KEY_WPS_BUTTON>; |
||
104 | }; |
||
105 | }; |
||
106 | |||
107 | switch-leds { |
||
108 | compatible = "gpio-leds"; |
||
109 | |||
110 | wlan { |
||
111 | label = "fritz4040:green:wlan"; |
||
112 | gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; |
||
113 | }; |
||
114 | |||
115 | panic: info_red { |
||
116 | label = "fritz4040:red:info"; |
||
117 | gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; |
||
118 | panic-indicator; |
||
119 | }; |
||
120 | |||
121 | wan { |
||
122 | label = "fritz4040:green:wan"; |
||
123 | gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; |
||
124 | }; |
||
125 | |||
126 | power: power { |
||
127 | label = "fritz4040:green:power"; |
||
128 | gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; |
||
129 | }; |
||
130 | |||
131 | lan { |
||
132 | label = "fritz4040:green:lan"; |
||
133 | gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; |
||
134 | }; |
||
135 | |||
136 | flash: info_amber { |
||
137 | label = "fritz4040:amber:info"; |
||
138 | gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; |
||
139 | }; |
||
140 | }; |
||
141 | }; |
||
142 | |||
143 | &tlmm { |
||
144 | serial_pins: serial_pinmux { |
||
145 | mux { |
||
146 | pins = "gpio60", "gpio61"; |
||
147 | function = "blsp_uart0"; |
||
148 | bias-disable; |
||
149 | }; |
||
150 | }; |
||
151 | |||
152 | spi_0_pins: spi_0_pinmux { |
||
153 | mux { |
||
154 | function = "blsp_spi0"; |
||
155 | pins = "gpio55", "gpio56", "gpio57"; |
||
156 | drive-strength = <12>; |
||
157 | bias-disable; |
||
158 | }; |
||
159 | |||
160 | mux_cs { |
||
161 | function = "gpio"; |
||
162 | pins = "gpio54"; |
||
163 | drive-strength = <2>; |
||
164 | bias-disable; |
||
165 | output-high; |
||
166 | }; |
||
167 | }; |
||
168 | }; |
||
169 | |||
170 | &cryptobam { |
||
171 | status = "okay"; |
||
172 | }; |
||
173 | |||
174 | &blsp_dma { |
||
175 | status = "okay"; |
||
176 | }; |
||
177 | |||
178 | &blsp1_spi1 { /* BLSP1 QUP1 */ |
||
179 | pinctrl-0 = <&spi_0_pins>; |
||
180 | pinctrl-names = "default"; |
||
181 | status = "okay"; |
||
182 | cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; |
||
183 | |||
184 | flash@0 { |
||
185 | compatible = "jedec,spi-nor"; |
||
186 | reg = <0>; |
||
187 | spi-max-frequency = <24000000>; |
||
188 | status = "okay"; |
||
189 | m25p,fast-read; |
||
190 | |||
191 | partitions { |
||
192 | compatible = "fixed-partitions"; |
||
193 | #address-cells = <1>; |
||
194 | #size-cells = <1>; |
||
195 | |||
196 | partition0@0 { |
||
197 | label = "SBL1"; |
||
198 | reg = <0x00000000 0x00040000>; |
||
199 | read-only; |
||
200 | }; |
||
201 | partition1@40000 { |
||
202 | label = "MIBIB"; |
||
203 | reg = <0x00040000 0x00020000>; |
||
204 | read-only; |
||
205 | }; |
||
206 | partition2@60000 { |
||
207 | label = "QSEE"; |
||
208 | reg = <0x00060000 0x00060000>; |
||
209 | read-only; |
||
210 | }; |
||
211 | partition3@c0000 { |
||
212 | label = "CDT"; |
||
213 | reg = <0x000c0000 0x00010000>; |
||
214 | read-only; |
||
215 | }; |
||
216 | partition4@d0000 { |
||
217 | label = "DDRPARAMS"; |
||
218 | reg = <0x000d0000 0x00010000>; |
||
219 | read-only; |
||
220 | }; |
||
221 | partition5@e0000 { |
||
222 | label = "APPSBLENV"; /* uboot env - empty */ |
||
223 | reg = <0x000e0000 0x00010000>; |
||
224 | read-only; |
||
225 | }; |
||
226 | partition6@f0000 { |
||
227 | label = "urlader"; /* APPSBL */ |
||
228 | reg = <0x000f0000 0x0002dc000>; |
||
229 | read-only; |
||
230 | }; |
||
231 | partition7@11dc00 { |
||
232 | /* make a backup of this partition! */ |
||
233 | label = "urlader_config"; |
||
234 | reg = <0x0011dc00 0x00002400>; |
||
235 | read-only; |
||
236 | }; |
||
237 | partition8@120000 { |
||
238 | label = "tffs1"; |
||
239 | reg = <0x00120000 0x00080000>; |
||
240 | read-only; |
||
241 | }; |
||
242 | partition9@1a0000 { |
||
243 | label = "tffs2"; |
||
244 | reg = <0x001a0000 0x00080000>; |
||
245 | read-only; |
||
246 | }; |
||
247 | partition10@220000 { |
||
248 | label = "uboot"; |
||
249 | reg = <0x00220000 0x00080000>; |
||
250 | read-only; |
||
251 | }; |
||
252 | partition11@2A0000 { |
||
253 | compatible = "denx,fit"; |
||
254 | label = "firmware"; |
||
255 | reg = <0x002a0000 0x01c60000>; |
||
256 | }; |
||
257 | partition12@1f00000 { |
||
258 | label = "jffs2"; |
||
259 | reg = <0x01f00000 0x00100000>; |
||
260 | }; |
||
261 | }; |
||
262 | }; |
||
263 | }; |
||
264 | |||
265 | &blsp1_uart1 { |
||
266 | pinctrl-0 = <&serial_pins>; |
||
267 | pinctrl-names = "default"; |
||
268 | status = "okay"; |
||
269 | }; |
||
270 | |||
271 | &usb3_ss_phy { |
||
272 | status = "okay"; |
||
273 | }; |
||
274 | |||
275 | &usb3_hs_phy { |
||
276 | status = "okay"; |
||
277 | }; |
||
278 | |||
279 | &usb2_hs_phy { |
||
280 | status = "okay"; |
||
281 | }; |
||
282 | |||
283 | &wifi0 { |
||
284 | status = "okay"; |
||
285 | qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; |
||
286 | }; |
||
287 | |||
288 | &wifi1 { |
||
289 | status = "okay"; |
||
290 | qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; |
||
291 | }; |