OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2  
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
7  
8 / {
9 model = "Linksys EA6350v3";
10 compatible = "linksys,ea6350v3";
11  
12 aliases {
13 led-boot = &power;
14 led-failsafe = &power;
15 led-running = &power;
16 led-upgrade = &power;
17 };
18  
19 soc {
20 rng@22000 {
21 status = "okay";
22 };
23  
24 mdio@90000 {
25 status = "okay";
26 };
27  
28 ess-psgmii@98000 {
29 status = "okay";
30 };
31  
32 tcsr@1949000 {
33 compatible = "qcom,tcsr";
34 reg = <0x1949000 0x100>;
35 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
36 };
37  
38 tcsr@194b000 {
39 compatible = "qcom,tcsr";
40 reg = <0x194b000 0x100>;
41 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
42 };
43  
44 ess_tcsr@1953000 {
45 compatible = "qcom,tcsr";
46 reg = <0x1953000 0x1000>;
47 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
48 };
49  
50 tcsr@1957000 {
51 compatible = "qcom,tcsr";
52 reg = <0x1957000 0x100>;
53 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
54 };
55  
56 usb2@60f8800 {
57 status = "okay";
58 };
59  
60 usb3@8af8800 {
61 status = "okay";
62 };
63  
64 crypto@8e3a000 {
65 status = "okay";
66 };
67  
68 watchdog@b017000 {
69 status = "okay";
70 };
71  
72 ess-switch@c000000 {
73 status = "okay";
74 };
75  
76 edma@c080000 {
77 status = "okay";
78 };
79 };
80  
81 keys {
82 compatible = "gpio-keys";
83  
84 reset {
85 label = "reset";
86 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_RESTART>;
88 };
89  
90 wps {
91 label = "wps";
92 gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
93 linux,code = <KEY_WPS_BUTTON>;
94 };
95 };
96  
97 leds {
98 compatible = "gpio-leds";
99  
100 power: status {
101 label = "EA6350v3:green:status";
102 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
103 };
104 };
105 };
106  
107 &blsp1_uart1 {
108 pinctrl-0 = <&serial_pins>;
109 pinctrl-names = "default";
110 status = "okay";
111 };
112  
113 &cryptobam {
114 status = "okay";
115 };
116  
117 &wifi0 {
118 status = "okay";
119 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
120 };
121  
122 &wifi1 {
123 status = "okay";
124 qcom,ath10k-calibration-variant = "linksys-ea6350v3";
125 };
126  
127  
128 &blsp_dma {
129 status = "okay";
130 };
131  
132 &tlmm {
133 serial_pins: serial_pinmux {
134 mux {
135 pins = "gpio60", "gpio61";
136 function = "blsp_uart0";
137 bias-disable;
138 };
139 };
140  
141 spi_0_pins: spi_0_pinmux {
142 mux {
143 function = "blsp_spi0";
144 pins = "gpio55", "gpio56", "gpio57";
145 drive-strength = <12>;
146 bias-disable;
147 };
148  
149 mux_cs {
150 function = "gpio";
151 pins = "gpio54", "gpio59";
152 drive-strength = <2>;
153 bias-disable;
154 output-high;
155 };
156 };
157 };
158  
159 &blsp1_spi1 { /* BLSP1 QUP1 */
160 pinctrl-0 = <&spi_0_pins>;
161 pinctrl-names = "default";
162 status = "okay";
163 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
164 <&tlmm 59 GPIO_ACTIVE_HIGH>;
165  
166 flash@0 {
167 compatible = "jedec,spi-nor";
168 reg = <0>;
169 spi-max-frequency = <24000000>;
170  
171 partitions {
172 compatible = "fixed-partitions";
173 #address-cells = <1>;
174 #size-cells = <1>;
175  
176 SBL1@0 {
177 label = "SBL1";
178 reg = <0x00000000 0x00040000>;
179 read-only;
180 };
181 MBIB@40000 {
182 label = "MIBIB";
183 reg = <0x00040000 0x00020000>;
184 read-only;
185 };
186 QSEE@60000 {
187 label = "QSEE";
188 reg = <0x00060000 0x00060000>;
189 read-only;
190 };
191 CDT@c0000 {
192 label = "CDT";
193 reg = <0x000c0000 0x00010000>;
194 read-only;
195 };
196 APPSBLENV@d0000 {
197 label = "APPSBLENV";
198 reg = <0x000d0000 0x00010000>;
199 read-only;
200 };
201 APPSBL@e0000 {
202 label = "APPSBL"; /* uboot */
203 reg = <0x000e0000 0x00080000>;
204 read-only;
205 };
206 ART@160000 {
207 label = "ART";
208 reg = <0x00160000 0x00010000>;
209 read-only;
210 };
211 u_env@170000 {
212 label = "u_env";
213 reg = <0x00170000 0x00020000>;
214 };
215 s_env@190000 {
216 label = "s_env";
217 reg = <0x00190000 0x00020000>;
218 };
219 devinfo@1b0000 {
220 label = "devinfo";
221 reg = <0x001b0000 0x00010000>;
222 };
223 /* 0x001c0000 - 0x00200000 unused */
224 };
225 };
226  
227 flash@1 {
228 status = "okay";
229 compatible = "spi-nand";
230 reg = <1>;
231 spi-max-frequency = <24000000>;
232  
233 partitions {
234 compatible = "fixed-partitions";
235 #address-cells = <1>;
236 #size-cells = <1>;
237  
238 kernel@0 {
239 label = "kernel";
240 reg = <0x00000000 0x02800000>;
241 };
242 rootfs@300000 {
243 label = "rootfs";
244 reg = <0x00300000 0x02500000>;
245 };
246 alt_kernel@2800000 {
247 label = "alt_kernel";
248 reg = <0x02800000 0x02800000>;
249 };
250 alt_rootfs@2b00000 {
251 label = "alt_rootfs";
252 reg = <0x02b00000 0x02500000>;
253 };
254 sysdiag@5000000 {
255 label = "sysdiag";
256 reg = <0x05000000 0x00100000>;
257 };
258 syscfg@5100000 {
259 label = "syscfg";
260 reg = <0x05100000 0x02F00000>;
261 };
262 /* 0x00000000 - 0x08000000: 128 MiB */
263 };
264 };
265 };
266  
267 &usb3_ss_phy {
268 status = "okay";
269 };
270  
271 &usb3_hs_phy {
272 status = "okay";
273 };
274  
275 &usb2_hs_phy {
276 status = "okay";
277 };