OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "qca956x.dtsi"
8  
9 / {
10 compatible = "xiaomi,mi-router-4q", "qca,qca9560";
11 model = "Xiaomi Mi Router 4Q";
12  
13 aliases {
14 led-boot = &led_yellow;
15 led-failsafe = &led_red;
16 led-running = &led_blue;
17 led-upgrade = &led_red;
18 };
19  
20 chosen {
21 bootargs = "console=ttyS0,115200n8";
22 };
23  
24 keys {
25 compatible = "gpio-keys-polled";
26 poll-interval = <100>;
27  
28 reset {
29 label = "Reset button";
30 linux,code = <KEY_RESTART>;
31 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
32 };
33  
34 wps {
35 label = "WPS/MI button";
36 linux,code = <KEY_WPS_BUTTON>;
37 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
38 };
39 };
40  
41 leds {
42 compatible = "gpio-leds";
43  
44 led_red: led_red {
45 label = "mi-router-4q:red:led";
46 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
47 };
48  
49 led_yellow: led_yellow {
50 label = "mi-router-4q:yellow:led";
51 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
52 };
53  
54 led_blue: led_blue {
55 label = "mi-router-4q:blue:led";
56 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
57 };
58 };
59 };
60  
61 &uart {
62 status = "okay";
63 };
64  
65 &gpio {
66 status = "okay";
67 };
68  
69 &spi {
70 status = "okay";
71 num-cs = <1>;
72  
73 flash@0 {
74 compatible = "jedec,spi-nor";
75 reg = <0>;
76 spi-max-frequency = <25000000>;
77  
78 partitions {
79 compatible = "fixed-partitions";
80 #address-cells = <1>;
81 #size-cells = <1>;
82  
83 partition@0 {
84 label = "u-boot";
85 reg = <0x000000 0x30000>;
86 read-only;
87 };
88  
89 partition@30000 {
90 label = "nvram";
91 reg = <0x030000 0x10000>;
92 read-only;
93 };
94  
95 partition@40000 {
96 label = "boarddata";
97 reg = <0x40000 0x10000>;
98 read-only;
99 };
100  
101 partition@50000 {
102 label = "crash";
103 reg = <0x50000 0x10000>;
104 read-only;
105 };
106  
107 art: partition@60000 {
108 label = "art";
109 reg = <0x60000 0x10000>;
110 read-only;
111 };
112  
113 partition@70000 {
114 label = "cfg_bak";
115 reg = <0x70000 0x20000>;
116 read-only;
117 };
118  
119 partition@90000 {
120 label = "overlay";
121 reg = <0x90000 0x170000>;
122 read-only;
123 };
124  
125 partition@200000 {
126 compatible = "denx,uimage";
127 label = "firmware";
128 reg = <0x200000 0xe00000>;
129 };
130 };
131 };
132 };
133  
134 &eth0 {
135 status = "okay";
136  
137 phy-handle = <&swphy4>;
138 mtd-mac-address = <&art 0x0>;
139 };
140  
141 &eth1 {
142 status = "okay";
143  
144 mtd-mac-address = <&art 0x6>;
145 };
146  
147 &wmac {
148 status = "okay";
149  
150 mtd-cal-data = <&art 0x1000>;
151 mtd-mac-address = <&art 0x0>;
152 mtd-mac-address-increment = <1>;
153 };