OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "ar9342_ubnt_wa.dtsi"
8  
9 / {
10 compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
11 model = "Ubiquiti Nanostation AC (WA)";
12  
13 leds {
14 compatible = "gpio-leds";
15  
16 rssi0 {
17 label = "ubnt:blue:rssi0";
18 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
19 };
20  
21 rssi1 {
22 label = "ubnt:blue:rssi1";
23 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
24 };
25  
26 rssi2 {
27 label = "ubnt:blue:rssi2";
28 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
29 };
30  
31 rssi3 {
32 label = "ubnt:blue:rssi3";
33 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
34 };
35 };
36 };
37  
38 &mdio0 {
39 status = "okay";
40  
41 phy-mask = <4>;
42 phy0: ethernet-phy@0 {
43 phy-mode = "rgmii";
44 reg = <0>;
45  
46 qca,ar8327-initvals = <
47 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
48 0x58 0xffb7ffb7 /* LED_CTRL2 */
49 0x5c 0x03ffff00 /* LED_CTRL3 */
50 0x7c 0x0000007e /* PORT0_STATUS */
51 >;
52 };
53 };
54  
55 &eth0 {
56 status = "okay";
57  
58 /* default for ar934x, except for 1000M and 10M */
59 pll-data = <0x06000000 0x00000101 0x00001313>;
60  
61 mtd-mac-address = <&eeprom 0x0>;
62  
63 phy-mode = "rgmii";
64 phy-handle = <&phy0>;
65  
66 gmac-config {
67 device = <&gmac>;
68 rxd-delay = <2>;
69 rxdv-delay = <2>;
70 };
71 };
72  
73 &wmac {
74 status = "okay";
75  
76 mtd-cal-data = <&eeprom 0x1000>;
77 mtd-mac-address = <&eeprom 0x1002>;
78 };