OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "ar7240.dtsi"
8  
9 / {
10 compatible = "buffalo,whr-g301n", "qca,ar7240";
11 model = "Buffalo WHR-G301N";
12  
13 aliases {
14 led-boot = &diag;
15 led-failsafe = &diag;
16 led-upgrade = &diag;
17 };
18  
19 keys {
20 compatible = "gpio-keys-polled";
21 poll-interval = <20>;
22  
23 router_on {
24 label = "router_on";
25 linux,code = <BTN_2>;
26 linux,input-type = <EV_SW>;
27 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
28 debounce-interval = <60>;
29 };
30  
31 router_off {
32 label = "router_off";
33 linux,code = <BTN_3>;
34 linux,input-type = <EV_SW>;
35 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
36 debounce-interval = <60>;
37 };
38  
39 reset {
40 label = "reset";
41 linux,code = <KEY_RESTART>;
42 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
43 debounce-interval = <60>;
44 };
45  
46 wps {
47 label = "wps";
48 linux,code = <KEY_WPS_BUTTON>;
49 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
50 debounce-interval = <60>;
51 };
52 };
53  
54 gpio-leds {
55 compatible = "gpio-leds";
56 pinctrl-names = "default";
57 pinctrl-0 = <&switch_led_pins>;
58  
59 security {
60 label = "whr-g301n:orange:security";
61 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
62 };
63  
64 diag: diag {
65 label = "whr-g301n:red:diag";
66 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
67 };
68  
69 router {
70 label = "whr-g301n:green:router";
71 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
72 };
73  
74 lan1 {
75 label = "whr-g301n:green:lan1";
76 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
77 };
78  
79 lan2 {
80 label = "whr-g301n:green:lan2";
81 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
82 };
83  
84 lan3 {
85 label = "whr-g301n:green:lan3";
86 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
87 };
88  
89 lan4 {
90 label = "whr-g301n:green:lan4";
91 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
92 };
93  
94 wan {
95 label = "whr-g301n:green:wan";
96 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
97 };
98 };
99  
100 ath9k-leds {
101 compatible = "gpio-leds";
102  
103 wlan {
104 label = "whr-g301n:green:wlan";
105 gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
106 linux,default-trigger = "phy0tpt";
107 };
108 };
109 };
110  
111 &spi {
112 status = "okay";
113 num-cs = <1>;
114  
115 flash@0 {
116 compatible = "jedec,spi-nor";
117 reg = <0>;
118 spi-max-frequency = <25000000>;
119  
120 partitions {
121 compatible = "fixed-partitions";
122 #address-cells = <1>;
123 #size-cells = <1>;
124  
125 partition@0 {
126 reg = <0x0 0x3e000>;
127 label = "u-boot";
128 read-only;
129 };
130  
131 partition@3e000 {
132 reg = <0x3e000 0x2000>;
133 label = "u-boot-env";
134 read-only;
135 };
136  
137 partition@40000 {
138 compatible = "denx,uimage";
139 reg = <0x40000 0x3a0000>;
140 label = "firmware";
141 };
142  
143 partition@3e0000 {
144 reg = <0x3e0000 0x10000>;
145 label = "user_property";
146 read-only;
147 };
148  
149 art: partition@3f0000 {
150 reg = <0x3f0000 0x10000>;
151 label = "art";
152 read-only;
153 };
154 };
155 };
156 };
157  
158 &eth0 {
159 status = "okay";
160  
161 mtd-mac-address = <&art 0x120c>;
162 };
163  
164 &eth1 {
165 status = "okay";
166  
167 mtd-mac-address = <&art 0x120c>;
168 mtd-mac-address-increment = <1>;
169 };
170  
171 &pcie {
172 status = "okay";
173  
174 ath9k: wifi@0,0 {
175 compatible = "pci168c,002a";
176 reg = <0x0000 0 0 0 0>;
177 qca,no-eeprom;
178 mtd-mac-address = <&art 0x120c>;
179 #gpio-cells = <2>;
180 gpio-controller;
181 };
182 };
183  
184 &pinmux {
185 switch_led_pins: switch_led_pins {
186 pinctrl-single,bits = <0x0 0x0 0xf8>;
187 };
188 };
189  
190 &uart {
191 status = "okay";
192 };