OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 #!/bin/sh
2  
3 [ -x /usr/sbin/pppd ] || exit 0
4  
5 [ -n "$INCLUDE_ONLY" ] || {
6 . /lib/functions.sh
7 . /lib/functions/network.sh
8 . ../netifd-proto.sh
9 init_proto "$@"
10 }
11  
12 ppp_select_ipaddr()
13 {
14 local subnets=$1
15 local res
16 local res_mask
17  
18 for subnet in $subnets; do
19 local addr="${subnet%%/*}"
20 local mask="${subnet#*/}"
21  
22 if [ -n "$res_mask" -a "$mask" != 32 ]; then
23 [ "$mask" -gt "$res_mask" ] || [ "$res_mask" = 32 ] && {
24 res="$addr"
25 res_mask="$mask"
26 }
27 elif [ -z "$res_mask" ]; then
28 res="$addr"
29 res_mask="$mask"
30 fi
31 done
32  
33 echo "$res"
34 }
35  
36 ppp_exitcode_tostring()
37 {
38 local errorcode=$1
39 [ -n "$errorcode" ] || errorcode=5
40  
41 case "$errorcode" in
42 0) echo "OK" ;;
43 1) echo "FATAL_ERROR" ;;
44 2) echo "OPTION_ERROR" ;;
45 3) echo "NOT_ROOT" ;;
46 4) echo "NO_KERNEL_SUPPORT" ;;
47 5) echo "USER_REQUEST" ;;
48 6) echo "LOCK_FAILED" ;;
49 7) echo "OPEN_FAILED" ;;
50 8) echo "CONNECT_FAILED" ;;
51 9) echo "PTYCMD_FAILED" ;;
52 10) echo "NEGOTIATION_FAILED" ;;
53 11) echo "PEER_AUTH_FAILED" ;;
54 12) echo "IDLE_TIMEOUT" ;;
55 13) echo "CONNECT_TIME" ;;
56 14) echo "CALLBACK" ;;
57 15) echo "PEER_DEAD" ;;
58 16) echo "HANGUP" ;;
59 17) echo "LOOPBACK" ;;
60 18) echo "INIT_FAILED" ;;
61 19) echo "AUTH_TOPEER_FAILED" ;;
62 20) echo "TRAFFIC_LIMIT" ;;
63 21) echo "CNID_AUTH_FAILED";;
64 *) echo "UNKNOWN_ERROR" ;;
65 esac
66 }
67  
68 ppp_generic_init_config() {
69 proto_config_add_string username
70 proto_config_add_string password
71 proto_config_add_string keepalive
72 proto_config_add_boolean keepalive_adaptive
73 proto_config_add_int demand
74 proto_config_add_string pppd_options
75 proto_config_add_string 'connect:file'
76 proto_config_add_string 'disconnect:file'
77 [ -e /proc/sys/net/ipv6 ] && proto_config_add_string ipv6
78 proto_config_add_boolean authfail
79 proto_config_add_int mtu
80 proto_config_add_string pppname
81 proto_config_add_string unnumbered
82 proto_config_add_boolean persist
83 proto_config_add_int maxfail
84 proto_config_add_int holdoff
85 }
86  
87 ppp_generic_setup() {
88 local config="$1"; shift
89 local localip
90  
91 json_get_vars ip6table demand keepalive keepalive_adaptive username password pppd_options pppname unnumbered persist maxfail holdoff peerdns
92  
93 [ ! -e /proc/sys/net/ipv6 ] && ipv6=0 || json_get_var ipv6 ipv6
94  
95 if [ "$ipv6" = 0 ]; then
96 ipv6=""
97 elif [ -z "$ipv6" -o "$ipv6" = auto ]; then
98 ipv6=1
99 autoipv6=1
100 fi
101  
102 if [ "${demand:-0}" -gt 0 ]; then
103 demand="precompiled-active-filter /etc/ppp/filter demand idle $demand"
104 else
105 demand=""
106 fi
107 if [ -n "$persist" ]; then
108 [ "${persist}" -lt 1 ] && persist="nopersist" || persist="persist"
109 fi
110 if [ -z "$maxfail" ]; then
111 [ "$persist" = "persist" ] && maxfail=0 || maxfail=1
112 fi
113 [ -n "$mtu" ] || json_get_var mtu mtu
114 [ -n "$pppname" ] || pppname="${proto:-ppp}-$config"
115 [ -n "$unnumbered" ] && {
116 local subnets
117 ( proto_add_host_dependency "$config" "" "$unnumbered" )
118 network_get_subnets subnets "$unnumbered"
119 localip=$(ppp_select_ipaddr "$subnets")
120 [ -n "$localip" ] || {
121 proto_block_restart "$config"
122 return
123 }
124 }
125  
126 [ -n "$keepalive" ] || keepalive="5 1"
127  
128 local lcp_failure="${keepalive%%[, ]*}"
129 local lcp_interval="${keepalive##*[, ]}"
130 local lcp_adaptive="lcp-echo-adaptive"
131 [ "${lcp_failure:-0}" -lt 1 ] && lcp_failure=""
132 [ "$lcp_interval" != "$keepalive" ] || lcp_interval=5
133 [ "${keepalive_adaptive:-1}" -lt 1 ] && lcp_adaptive=""
134 [ -n "$connect" ] || json_get_var connect connect
135 [ -n "$disconnect" ] || json_get_var disconnect disconnect
136  
137 proto_run_command "$config" /usr/sbin/pppd \
138 nodetach ipparam "$config" \
139 ifname "$pppname" \
140 ${localip:+$localip:} \
141 ${lcp_failure:+lcp-echo-interval $lcp_interval lcp-echo-failure $lcp_failure $lcp_adaptive} \
142 ${ipv6:++ipv6} \
143 ${autoipv6:+set AUTOIPV6=1} \
144 ${ip6table:+set IP6TABLE=$ip6table} \
145 ${peerdns:+set PEERDNS=$peerdns} \
146 nodefaultroute \
147 usepeerdns \
148 $demand $persist maxfail $maxfail \
149 ${holdoff:+holdoff "$holdoff"} \
150 ${username:+user "$username" password "$password"} \
151 ${connect:+connect "$connect"} \
152 ${disconnect:+disconnect "$disconnect"} \
153 ip-up-script /lib/netifd/ppp-up \
154 ${ipv6:+ipv6-up-script /lib/netifd/ppp6-up} \
155 ip-down-script /lib/netifd/ppp-down \
156 ${ipv6:+ipv6-down-script /lib/netifd/ppp-down} \
157 ${mtu:+mtu $mtu mru $mtu} \
158 "$@" $pppd_options
159 }
160  
161 ppp_generic_teardown() {
162 local interface="$1"
163 local errorstring=$(ppp_exitcode_tostring $ERROR)
164  
165 case "$ERROR" in
166 0)
167 ;;
168 2)
169 proto_notify_error "$interface" "$errorstring"
170 proto_block_restart "$interface"
171 ;;
172 11|19)
173 json_get_var authfail authfail
174 proto_notify_error "$interface" "$errorstring"
175 if [ "${authfail:-0}" -gt 0 ]; then
176 proto_block_restart "$interface"
177 fi
178 ;;
179 *)
180 proto_notify_error "$interface" "$errorstring"
181 ;;
182 esac
183  
184 proto_kill_command "$interface"
185 }
186  
187 # PPP on serial device
188  
189 proto_ppp_init_config() {
190 proto_config_add_string "device"
191 ppp_generic_init_config
192 no_device=1
193 available=1
194 lasterror=1
195 }
196  
197 proto_ppp_setup() {
198 local config="$1"
199  
200 json_get_var device device
201 ppp_generic_setup "$config" "$device"
202 }
203  
204 proto_ppp_teardown() {
205 ppp_generic_teardown "$@"
206 }
207  
208 proto_pppoe_init_config() {
209 ppp_generic_init_config
210 proto_config_add_string "ac"
211 proto_config_add_string "service"
212 proto_config_add_string "host_uniq"
213 lasterror=1
214 }
215  
216 proto_pppoe_setup() {
217 local config="$1"
218 local iface="$2"
219  
220 for module in slhc ppp_generic pppox pppoe; do
221 /sbin/insmod $module 2>&- >&-
222 done
223  
224 json_get_var mtu mtu
225 mtu="${mtu:-1492}"
226  
227 json_get_var ac ac
228 json_get_var service service
229 json_get_var host_uniq host_uniq
230  
231 ppp_generic_setup "$config" \
232 plugin rp-pppoe.so \
233 ${ac:+rp_pppoe_ac "$ac"} \
234 ${service:+rp_pppoe_service "$service"} \
235 ${host_uniq:+host-uniq "$host_uniq"} \
236 "nic-$iface"
237 }
238  
239 proto_pppoe_teardown() {
240 ppp_generic_teardown "$@"
241 }
242  
243 proto_pppoa_init_config() {
244 ppp_generic_init_config
245 proto_config_add_int "atmdev"
246 proto_config_add_int "vci"
247 proto_config_add_int "vpi"
248 proto_config_add_string "encaps"
249 no_device=1
250 available=1
251 lasterror=1
252 }
253  
254 proto_pppoa_setup() {
255 local config="$1"
256 local iface="$2"
257  
258 for module in slhc ppp_generic pppox pppoatm; do
259 /sbin/insmod $module 2>&- >&-
260 done
261  
262 json_get_vars atmdev vci vpi encaps
263  
264 case "$encaps" in
265 1|vc) encaps="vc-encaps" ;;
266 *) encaps="llc-encaps" ;;
267 esac
268  
269 ppp_generic_setup "$config" \
270 plugin pppoatm.so \
271 ${atmdev:+$atmdev.}${vpi:-8}.${vci:-35} \
272 ${encaps}
273 }
274  
275 proto_pppoa_teardown() {
276 ppp_generic_teardown "$@"
277 }
278  
279 proto_pptp_init_config() {
280 ppp_generic_init_config
281 proto_config_add_string "server"
282 proto_config_add_string "interface"
283 available=1
284 no_device=1
285 lasterror=1
286 }
287  
288 proto_pptp_setup() {
289 local config="$1"
290 local iface="$2"
291  
292 local ip serv_addr server interface
293 json_get_vars interface server
294 [ -n "$server" ] && {
295 for ip in $(resolveip -t 5 "$server"); do
296 ( proto_add_host_dependency "$config" "$ip" $interface )
297 serv_addr=1
298 done
299 }
300 [ -n "$serv_addr" ] || {
301 echo "Could not resolve server address"
302 sleep 5
303 proto_setup_failed "$config"
304 exit 1
305 }
306  
307 local load
308 for module in slhc ppp_generic ppp_async ppp_mppe ip_gre gre pptp; do
309 grep -q "^$module " /proc/modules && continue
310 /sbin/insmod $module 2>&- >&-
311 load=1
312 done
313 [ "$load" = "1" ] && sleep 1
314  
315 ppp_generic_setup "$config" \
316 plugin pptp.so \
317 pptp_server $server \
318 file /etc/ppp/options.pptp
319 }
320  
321 proto_pptp_teardown() {
322 ppp_generic_teardown "$@"
323 }
324  
325 [ -n "$INCLUDE_ONLY" ] || {
326 add_protocol ppp
327 [ -f /usr/lib/pppd/*/rp-pppoe.so ] && add_protocol pppoe
328 [ -f /usr/lib/pppd/*/pppoatm.so ] && add_protocol pppoa
329 [ -f /usr/lib/pppd/*/pptp.so ] && add_protocol pptp
330 }
331