OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 /dts-v1/;
2  
3 #include "rt5350.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
10 model = "WIZnet WizFi630A";
11  
12 chosen {
13 bootargs = "console=ttyS1,115200";
14 };
15  
16 gpio-leds {
17 compatible = "gpio-leds";
18  
19 run {
20 label = "wizfi630a::run";
21 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
22 };
23  
24 wps {
25 label = "wizfi630a::wps";
26 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
27 };
28  
29 uart1 {
30 label = "wizfi630a::uart1";
31 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
32 };
33  
34 uart2 {
35 label = "wizfi630a::uart2";
36 gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
37 };
38 };
39  
40 gpio-keys-polled {
41 compatible = "gpio-keys-polled";
42 #address-cells = <1>;
43 #size-cells = <0>;
44 poll-interval = <20>;
45  
46 reset {
47 label = "reset";
48 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
50 };
51  
52 wps {
53 label = "wps";
54 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_WPS_BUTTON>;
56 };
57  
58 scm1 {
59 label = "SCM1";
60 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
61 linux,code = <BTN_0>;
62 };
63  
64 scm2 {
65 label = "SCM2";
66 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
67 linux,code = <BTN_1>;
68 };
69 };
70 };
71  
72 &gpio1 {
73 status = "okay";
74 };
75  
76 &spi0 {
77 status = "okay";
78  
79 m25p80@0 {
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "jedec,spi-nor";
83 reg = <0>;
84 spi-max-frequency = <10000000>;
85  
86 partition@0 {
87 #size-cells = <1>;
88 label = "uboot";
89 reg = <0x0 0x30000>;
90 read-only;
91 };
92  
93 partition@30000 {
94 #size-cells = <1>;
95 label = "uboot-env";
96 reg = <0x30000 0x10000>;
97 read-only;
98 };
99  
100 factory: partition@40000 {
101 #size-cells = <1>;
102 label = "factory";
103 reg = <0x40000 0x10000>;
104 read-only;
105 };
106  
107 partition@50000 {
108 #size-cells = <1>;
109 label = "firmware";
110 reg = <0x50000 0xfb0000>;
111 };
112 };
113 };
114  
115 &uart {
116 status = "okay";
117 pinctrl-names = "default";
118 pinctrl-0 = <&uartf_pins>;
119 };
120  
121 &pinctrl {
122 state_default: pinctrl0 {
123 gpio {
124 ralink,group = "i2c", "jtag" ;
125 ralink,function = "gpio";
126 };
127 };
128 };
129  
130 &ethernet {
131 mtd-mac-address = <&factory 0x4>;
132 };
133  
134 &esw {
135 mediatek,portmap = <0x17>;
136 };
137  
138 &wmac {
139 ralink,mtd-eeprom = <&factory 0>;
140 };
141  
142 &ehci {
143 status = "okay";
144 };
145  
146 &ohci {
147 status = "okay";
148 };