OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 /dts-v1/;
2  
3 #include "mt7620n.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "asus,rt-n12p", "ralink,mt7620n-soc";
10 model = "Asus RT-N12+";
11  
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15  
16 gpio-leds {
17 compatible = "gpio-leds";
18  
19 wan {
20 label = "rt-n12p:green:wan";
21 gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
22 };
23  
24 lan {
25 label = "rt-n12p:green:lan";
26 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
27 };
28  
29 power {
30 label = "rt-n12p:green:power";
31 gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
32 };
33  
34 air {
35 label = "rt-n12p:green:air";
36 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
37 };
38 };
39  
40 gpio-keys-polled {
41 compatible = "gpio-keys-polled";
42 #address-cells = <1>;
43 #size-cells = <0>;
44 poll-interval = <20>;
45  
46 reset {
47 label = "reset";
48 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
50 };
51 };
52 };
53  
54 &gpio1 {
55 status = "okay";
56 };
57  
58 &gpio2 {
59 status = "okay";
60 };
61  
62 &gpio3 {
63 status = "okay";
64 };
65  
66 &spi0 {
67 status = "okay";
68  
69 m25p80@0 {
70 #address-cells = <1>;
71 #size-cells = <1>;
72 compatible = "jedec,spi-nor";
73 reg = <0>;
74 spi-max-frequency = <10000000>;
75  
76 partition@0 {
77 label = "u-boot";
78 reg = <0x0 0x30000>;
79 read-only;
80 };
81  
82 partition@30000 {
83 label = "u-boot-env";
84 reg = <0x30000 0x10000>;
85 read-only;
86 };
87  
88 factory: partition@40000 {
89 label = "factory";
90 reg = <0x40000 0x10000>;
91 read-only;
92 };
93  
94 partition@50000 {
95 label = "firmware";
96 reg = <0x50000 0xfb0000>;
97 };
98 };
99 };
100  
101 &ethernet {
102 mtd-mac-address = <&factory 0x4>;
103 mediatek,portmap = "wllll";
104 };
105  
106 &wmac {
107 ralink,mtd-eeprom = <&factory 0>;
108 };
109  
110 &pinctrl {
111 state_default: pinctrl0 {
112 default {
113 ralink,group = "ephy", "wled", "i2c", "wdt", "pa", "spi refclk";
114 ralink,function = "gpio";
115 };
116 };
117 };