OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "huawei,d105", "ralink,rt3050-soc";
10 model = "Huawei D105";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x800000>;
15 bank-width = <2>;
16 device-width = <2>;
17 #address-cells = <1>;
18 #size-cells = <1>;
19  
20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
25  
26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
31  
32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
37  
38 partition@50000 {
39 label = "firmware";
40 reg = <0x50000 0x3b0000>;
41 };
42 };
43  
44 gpio-leds {
45 compatible = "gpio-leds";
46  
47 power {
48 label = "d105:red:power";
49 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
50 };
51  
52 wps {
53 label = "d105:green:usb";
54 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
55 };
56 };
57  
58 gpio-keys-polled {
59 compatible = "gpio-keys-polled";
60 #address-cells = <1>;
61 #size-cells = <0>;
62 poll-interval = <20>;
63  
64 reset {
65 label = "reset";
66 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_RESTART>;
68 };
69 };
70 };
71  
72 &pinctrl {
73 state_default: pinctrl0 {
74 gpio {
75 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
76 ralink,function = "gpio";
77 };
78 };
79 };
80  
81 &ethernet {
82 mtd-mac-address = <&factory 0x4>;
83 };
84  
85 &esw {
86 mediatek,portmap = <0x2f>;
87 };
88  
89 &wmac {
90 ralink,mtd-eeprom = <&factory 0>;
91 };
92  
93 &otg {
94 status = "okay";
95 };