OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 #include "ar9.dtsi"
2  
3 #include <dt-bindings/input/input.h>
4  
5 / {
6 chosen {
7 bootargs = "root= console=ttyLTQ0,115200";
8 };
9  
10 aliases {
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
14  
15 led-dsl = &dsl;
16 led-internet = &internet;
17 led-usb = &usb;
18 led-wifi = &wifi_green;
19 };
20  
21 memory@0 {
22 reg = <0x0 0x4000000>;
23 };
24  
25 fpi@10000000 {
26 gpio: pinmux@E100B10 {
27 pinctrl-names = "default";
28 pinctrl-0 = <&state_default>;
29  
30 state_default: pinmux {
31 exin {
32 lantiq,groups = "exin1";
33 lantiq,function = "exin";
34 };
35 pci {
36 lantiq,groups = "gnt1", "req1";
37 lantiq,function = "pci";
38 };
39 pci-in {
40 lantiq,groups = "req1";
41 lantiq,output = <0>;
42 lantiq,open-drain = <1>;
43 lantiq,pull = <2>;
44 };
45 pci-out {
46 lantiq,groups = "gnt1";
47 lantiq,output = <1>;
48 lantiq,pull = <0>;
49 };
50 };
51 pins_spi_default: pins_spi_default {
52 spi_in {
53 lantiq,groups = "spi_di";
54 lantiq,function = "spi";
55 };
56 spi_out {
57 lantiq,groups = "spi_do", "spi_clk",
58 "spi_cs4";
59 lantiq,function = "spi";
60 lantiq,output = <1>;
61 };
62 };
63 };
64  
65 etop@E180000 {
66 phy-mode = "mii";
67 };
68  
69 ifxhcd@E101000 {
70 status = "okay";
71 };
72 };
73  
74 rtl8366rb {
75 compatible = "realtek,rtl8366rb";
76 gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
77 gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
78  
79 realtek,initvals = <
80 0x0000 0x0830
81 0x0400 0x8130
82 0x000A 0x83ED
83 0x0F51 0x0017
84 0x02F5 0x0048
85 0x02FA 0xFFDF
86 0x02FB 0xFFE0
87 0x0450 0x0000
88 0x0401 0x0000
89 0x0431 0x0960
90 >;
91 };
92  
93  
94  
95 gpio-keys-polled {
96 compatible = "gpio-keys-polled";
97 #address-cells = <1>;
98 #size-cells = <0>;
99 poll-interval = <100>;
100  
101 rfkill {
102 label = "rfkill";
103 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
104 linux,code = <KEY_RFKILL>;
105 };
106 wps {
107 label = "wps";
108 gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
109 linux,code = <KEY_WPS_BUTTON>;
110 };
111 reset {
112 label = "reset";
113 gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
114 linux,code = <KEY_RESTART>;
115 };
116 };
117  
118 gpio-leds {
119 compatible = "gpio-leds";
120 internet: internet {
121 label = "dgn3500:green:internet";
122 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
123 };
124 internet2 {
125 label = "dgn3500:red:internet";
126 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
127 };
128 dsl: dsl {
129 label = "dgn3500:green:dsl";
130 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
131 };
132 usb: usb {
133 label = "dgn3500:green:usb";
134 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
135 };
136 power_green: power {
137 label = "dgn3500:green:power";
138 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
139 default-state = "keep";
140 };
141 power_red: power2 {
142 label = "dgn3500:red:power";
143 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
144 };
145 wifi_green: wifi {
146 label = "dgn3500:green:wireless";
147 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
148 };
149 wifi2 {
150 label = "dgn3500:amber:wireless";
151 gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
152 };
153 wps {
154 label = "dgn3500:green:wps";
155 gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
156 };
157 };
158 };
159  
160 &pci0 {
161 status = "okay";
162 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
163  
164 wifi@168c,0029 {
165 compatible = "pci168c,0029";
166 reg = <0x7000 0 0 0 0>;
167 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
168 };
169 };
170  
171 &spi {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pins_spi_default>;
174  
175 status = "ok";
176  
177 m25p80@4 {
178 #address-cells = <1>;
179 #size-cells = <1>;
180 compatible = "jedec,spi-nor";
181 reg = <4 0>;
182 spi-max-frequency = <20000000>;
183  
184 partitions {
185 compatible = "fixed-partitions";
186 #address-cells = <1>;
187 #size-cells = <1>;
188  
189 partition@0 {
190 reg = <0x0 0x10000>;
191 label = "uboot";
192 read-only;
193 };
194  
195 partition@10000 {
196 reg = <0x10000 0x10000>;
197 label = "uboot-env";
198 read-only;
199 };
200  
201 ath9k_cal: partition@20000 {
202 reg = <0x20000 0x10000>;
203 label = "calibration";
204 read-only;
205 };
206  
207 partition@50000 {
208 reg = <0x50000 0xfa0000>;
209 label = "firmware";
210 };
211 };
212 };
213 };