OpenWrt – Blame information for rev 4

Subversion Repositories:
Rev:
Rev Author Line No. Line
4 office 1 --- a/arch/mips/ath25/ar2315.c
2 +++ b/arch/mips/ath25/ar2315.c
3 @@ -23,6 +23,7 @@
4 #include <linux/reboot.h>
5 #include <linux/delay.h>
6 #include <linux/gpio.h>
7 +#include <linux/leds.h>
8 #include <asm/bootinfo.h>
9 #include <asm/reboot.h>
10 #include <asm/time.h>
11 @@ -260,6 +261,50 @@ static struct platform_device ar2315_spi
12 .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
13 };
14  
15 +#ifdef CONFIG_LEDS_GPIO
16 +static struct gpio_led ar2315_leds[6];
17 +static struct gpio_led_platform_data ar2315_led_data = {
18 + .leds = (void *)ar2315_leds,
19 +};
20 +
21 +static struct platform_device ar2315_gpio_leds = {
22 + .name = "leds-gpio",
23 + .id = -1,
24 + .dev = {
25 + .platform_data = (void *)&ar2315_led_data,
26 + }
27 +};
28 +
29 +static void __init ar2315_init_gpio_leds(void)
30 +{
31 + static char led_names[6][6];
32 + int i, led = 0;
33 +
34 + ar2315_led_data.num_leds = 0;
35 + for (i = 1; i < 8; i++) {
36 + if ((i == AR2315_RESET_GPIO) ||
37 + (i == ath25_board.config->reset_config_gpio))
38 + continue;
39 +
40 + if (i == ath25_board.config->sys_led_gpio)
41 + strcpy(led_names[led], "wlan");
42 + else
43 + sprintf(led_names[led], "gpio%d", i);
44 +
45 + ar2315_leds[led].name = led_names[led];
46 + ar2315_leds[led].gpio = i;
47 + ar2315_leds[led].active_low = 0;
48 + led++;
49 + }
50 + ar2315_led_data.num_leds = led;
51 + platform_device_register(&ar2315_gpio_leds);
52 +}
53 +#else
54 +static inline void ar2315_init_gpio_leds(void)
55 +{
56 +}
57 +#endif
58 +
59 void __init ar2315_init_devices(void)
60 {
61 /* Find board configuration */
62 @@ -270,6 +315,8 @@ void __init ar2315_init_devices(void)
63 ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
64 platform_device_register(&ar2315_gpio);
65  
66 + ar2315_init_gpio_leds();
67 +
68 ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
69 AR2315_MISC_IRQ_WATCHDOG);
70 ar2315_wdt_res[1].end = ar2315_wdt_res[1].start;
71 --- a/arch/mips/ath25/ar5312.c
72 +++ b/arch/mips/ath25/ar5312.c
73 @@ -23,6 +23,7 @@
74 #include <linux/mtd/physmap.h>
75 #include <linux/reboot.h>
76 #include <linux/gpio.h>
77 +#include <linux/leds.h>
78 #include <asm/bootinfo.h>
79 #include <asm/reboot.h>
80 #include <asm/time.h>
81 @@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi
82 .num_resources = ARRAY_SIZE(ar5312_gpio_res),
83 };
84  
85 +#ifdef CONFIG_LEDS_GPIO
86 +static struct gpio_led ar5312_leds[] = {
87 + { .name = "wlan", .gpio = 0, .active_low = 1, },
88 +};
89 +
90 +static const struct gpio_led_platform_data ar5312_led_data = {
91 + .num_leds = ARRAY_SIZE(ar5312_leds),
92 + .leds = (void *)ar5312_leds,
93 +};
94 +
95 +static struct platform_device ar5312_gpio_leds = {
96 + .name = "leds-gpio",
97 + .id = -1,
98 + .dev.platform_data = (void *)&ar5312_led_data,
99 +};
100 +#endif
101 +
102 static void __init ar5312_flash_init(void)
103 {
104 void __iomem *flashctl_base;
105 @@ -301,6 +319,11 @@ void __init ar5312_init_devices(void)
106  
107 platform_device_register(&ar5312_gpio);
108  
109 +#ifdef CONFIG_LEDS_GPIO
110 + ar5312_leds[0].gpio = config->sys_led_gpio;
111 + platform_device_register(&ar5312_gpio_leds);
112 +#endif
113 +
114 /* Fix up MAC addresses if necessary */
115 if (is_broadcast_ether_addr(config->enet0_mac))
116 ether_addr_copy(config->enet0_mac, config->enet1_mac);