OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
10 model = "ZyXEL Keenetic Viva";
11  
12 aliases {
13 led-boot = &led_power_green;
14 led-failsafe = &led_power_green;
15 led-running = &led_power_green;
16 led-upgrade = &led_power_green;
17 };
18  
19 leds {
20 compatible = "gpio-leds";
21  
22 wan {
23 label = "kng_rc:green:wan";
24 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
25 };
26  
27 usb {
28 label = "kng_rc:green:usb";
29 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
30 trigger-sources = <&ohci_port1>, <&ehci_port1>;
31 linux,default-trigger = "usbport";
32 };
33  
34 power_alert {
35 label = "kng_rc:red:power";
36 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
37 };
38  
39 wifi {
40 label = "kng_rc:green:wifi";
41 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
42 };
43  
44 led_power_green: power {
45 label = "kng_rc:green:power";
46 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
47 };
48 };
49  
50 keys {
51 compatible = "gpio-keys";
52 poll-interval = <20>;
53  
54 reset {
55 label = "reset";
56 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_RESTART>;
58 };
59  
60 wps {
61 label = "wps";
62 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_WPS_BUTTON>;
64 };
65  
66 fn {
67 label = "fn";
68 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
69 linux,code = <BTN_0>;
70 };
71 };
72  
73 gpio_export {
74 compatible = "gpio-export";
75 #size-cells = <0>;
76  
77 usb_power {
78 gpio-export,name = "usb";
79 gpio-export,output = <1>;
80 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
81 };
82 };
83  
84 rtl8367rb {
85 compatible = "realtek,rtl8367b";
86 cpu_port = <7>;
87 realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
88 mii-bus = <&mdio0>;
89 };
90 };
91  
92 &spi0 {
93 status = "okay";
94  
95 m25p80@0 {
96 compatible = "jedec,spi-nor";
97 reg = <0>;
98 spi-max-frequency = <10000000>;
99  
100 partitions {
101 compatible = "fixed-partitions";
102 #address-cells = <1>;
103 #size-cells = <1>;
104  
105 partition@0 {
106 label = "u-boot";
107 reg = <0x0 0x30000>;
108 read-only;
109 };
110  
111 partition@30000 {
112 label = "u-boot-env";
113 reg = <0x30000 0x10000>;
114 read-only;
115 };
116  
117 factory: partition@40000 {
118 label = "factory";
119 reg = <0x40000 0x10000>;
120 read-only;
121 };
122  
123 partition@50000 {
124 compatible = "denx,uimage";
125 label = "firmware";
126 reg = <0x50000 0xfb0000>;
127 };
128 };
129 };
130 };
131  
132 &pinctrl {
133 state_default: pinctrl0 {
134 gpio {
135 ralink,group = "i2c", "uartf";
136 ralink,function = "gpio";
137 };
138 };
139 };
140  
141 &ethernet {
142 status = "okay";
143 pinctrl-names = "default";
144 pinctrl-0 = <&rgmii2_pins &mdio_pins>;
145 mtd-mac-address = <&factory 0x00004>;
146  
147 port@4 {
148 status = "okay";
149 mediatek,fixed-link = <1000 1 1 1>;
150 phy-mode = "rgmii";
151 phy-handle = <&phy4>;
152 };
153  
154 mdio0: mdio-bus {
155 status = "okay";
156  
157 phy4: ethernet-phy@4 {
158 reg = <4>;
159 phy-mode = "rgmii";
160 };
161 };
162 };
163  
164 &gsw {
165 mediatek,port4 = "gmac";
166 };
167  
168 &wmac {
169 ralink,mtd-eeprom = <&factory 0>;
170 };
171  
172 &ehci {
173 status = "okay";
174 };
175  
176 &ohci {
177 status = "okay";
178 };