OpenWrt – Blame information for rev 2
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
1 | office | 1 | /dts-v1/; |
2 | |||
3 | #include "mt7621.dtsi" |
||
4 | |||
5 | #include <dt-bindings/gpio/gpio.h> |
||
6 | #include <dt-bindings/input/input.h> |
||
7 | |||
8 | / { |
||
9 | compatible = "zbtlink,zbt-we3526", "mediatek,mt7621-soc"; |
||
10 | model = "ZBT-WE3526"; |
||
11 | |||
12 | memory@0 { |
||
13 | device_type = "memory"; |
||
14 | reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; |
||
15 | }; |
||
16 | |||
17 | chosen { |
||
18 | bootargs = "console=ttyS0,115200"; |
||
19 | }; |
||
20 | |||
21 | palmbus: palmbus@1E000000 { |
||
22 | i2c@900 { |
||
23 | status = "okay"; |
||
24 | }; |
||
25 | }; |
||
26 | |||
27 | keys { |
||
28 | compatible = "gpio-keys-polled"; |
||
29 | poll-interval = <20>; |
||
30 | |||
31 | reset { |
||
32 | label = "reset"; |
||
33 | gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; |
||
34 | linux,code = <KEY_RESTART>; |
||
35 | }; |
||
36 | }; |
||
37 | }; |
||
38 | |||
39 | &sdhci { |
||
40 | status = "okay"; |
||
41 | }; |
||
42 | |||
43 | &spi0 { |
||
44 | status = "okay"; |
||
45 | |||
46 | m25p80@0 { |
||
47 | compatible = "jedec,spi-nor"; |
||
48 | reg = <0>; |
||
49 | spi-max-frequency = <10000000>; |
||
50 | |||
51 | partitions { |
||
52 | compatible = "fixed-partitions"; |
||
53 | #address-cells = <1>; |
||
54 | #size-cells = <1>; |
||
55 | |||
56 | partition@0 { |
||
57 | label = "u-boot"; |
||
58 | reg = <0x0 0x30000>; |
||
59 | read-only; |
||
60 | }; |
||
61 | |||
62 | partition@30000 { |
||
63 | label = "u-boot-env"; |
||
64 | reg = <0x30000 0x10000>; |
||
65 | read-only; |
||
66 | }; |
||
67 | |||
68 | factory: partition@40000 { |
||
69 | label = "factory"; |
||
70 | reg = <0x40000 0x10000>; |
||
71 | read-only; |
||
72 | }; |
||
73 | |||
74 | firmware: partition@50000 { |
||
75 | compatible = "denx,uimage"; |
||
76 | label = "firmware"; |
||
77 | reg = <0x50000 0xfb0000>; |
||
78 | }; |
||
79 | }; |
||
80 | }; |
||
81 | }; |
||
82 | |||
83 | &pcie { |
||
84 | status = "okay"; |
||
85 | }; |
||
86 | |||
87 | &pcie0 { |
||
88 | wifi@0,0 { |
||
89 | compatible = "pci14c3,7662"; |
||
90 | reg = <0x0000 0 0 0 0>; |
||
91 | mediatek,mtd-eeprom = <&factory 0x8000>; |
||
92 | ieee80211-freq-limit = <5000000 6000000>; |
||
93 | |||
94 | led { |
||
95 | led-sources = <2>; |
||
96 | }; |
||
97 | }; |
||
98 | }; |
||
99 | |||
100 | &pcie1 { |
||
101 | wifi@0,0 { |
||
102 | compatible = "pci14c3,7603"; |
||
103 | reg = <0x0000 0 0 0 0>; |
||
104 | mediatek,mtd-eeprom = <&factory 0x0000>; |
||
105 | }; |
||
106 | }; |
||
107 | |||
108 | ðernet { |
||
109 | mtd-mac-address = <&factory 0xe000>; |
||
110 | }; |
||
111 | |||
112 | &pinctrl { |
||
113 | state_default: pinctrl0 { |
||
114 | gpio { |
||
115 | ralink,group = "wdt"; |
||
116 | ralink,function = "gpio"; |
||
117 | }; |
||
118 | }; |
||
119 | }; |