OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620n.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc";
10 model = "Zbtlink ZBT-WA05";
11  
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18  
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22  
23 leds {
24 compatible = "gpio-leds";
25  
26 led_power: power {
27 label = "zbt-wa05:blue:power";
28 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
29 };
30  
31 usb {
32 label = "zbt-wa05:blue:usb";
33 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
34 trigger-sources = <&ohci_port1>, <&ehci_port1>;
35 linux,default-trigger = "usbport";
36 };
37  
38 air {
39 label = "zbt-wa05:blue:air";
40 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
41 };
42 };
43  
44 keys {
45 compatible = "gpio-keys-polled";
46 poll-interval = <20>;
47  
48 reset {
49 label = "reset";
50 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_RESTART>;
52 };
53 };
54 };
55  
56 &gpio1 {
57 status = "okay";
58 };
59  
60 &gpio2 {
61 status = "okay";
62 };
63  
64 &gpio3 {
65 status = "okay";
66 };
67  
68 &spi0 {
69 status = "okay";
70  
71 en25q64@0 {
72 compatible = "jedec,spi-nor";
73 reg = <0>;
74 spi-max-frequency = <10000000>;
75  
76 partitions {
77 compatible = "fixed-partitions";
78 #address-cells = <1>;
79 #size-cells = <1>;
80  
81 partition@0 {
82 label = "u-boot";
83 reg = <0x0 0x30000>;
84 read-only;
85 };
86  
87 partition@30000 {
88 label = "u-boot-env";
89 reg = <0x30000 0x10000>;
90 read-only;
91 };
92  
93 factory: partition@40000 {
94 label = "factory";
95 reg = <0x40000 0x10000>;
96 read-only;
97 };
98  
99 partition@50000 {
100 compatible = "denx,uimage";
101 label = "firmware";
102 reg = <0x50000 0x760000>;
103 };
104 };
105 };
106 };
107  
108 &ehci {
109 status = "okay";
110 };
111  
112 &ohci {
113 status = "okay";
114 };
115  
116 &ethernet {
117 mtd-mac-address = <&factory 0x4>;
118 mediatek,portmap = "wllll";
119 };
120  
121 &wmac {
122 ralink,mtd-eeprom = <&factory 0>;
123 };
124  
125 &pinctrl {
126 state_default: pinctrl0 {
127 default {
128 ralink,group = "i2c", "spi refclk", "wled";
129 ralink,function = "gpio";
130 };
131 };
132 };