OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
10 model = "Asus WL-330N3G";
11  
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18  
19 leds {
20 compatible = "gpio-leds";
21  
22 3g {
23 label = "wl-330n3g:blue:3g";
24 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
25 };
26  
27 3g2 {
28 label = "wl-330n3g:red:3g";
29 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
30 };
31  
32 led_power: power {
33 label = "wl-330n3g:blue:power";
34 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
35 };
36 };
37  
38 keys {
39 compatible = "gpio-keys-polled";
40 poll-interval = <20>;
41  
42 reset {
43 label = "reset";
44 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_RESTART>;
46 };
47  
48 wps {
49 label = "wps";
50 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_RESTART>;
52 };
53 };
54 };
55  
56 &spi0 {
57 status = "okay";
58  
59 m25p80@0 {
60 compatible = "jedec,spi-nor";
61 reg = <0>;
62 spi-max-frequency = <10000000>;
63  
64 partitions {
65 compatible = "fixed-partitions";
66 #address-cells = <1>;
67 #size-cells = <1>;
68  
69 partition@0 {
70 label = "u-boot";
71 reg = <0x0 0x30000>;
72 read-only;
73 };
74  
75 partition@30000 {
76 label = "u-boot-env";
77 reg = <0x30000 0x10000>;
78 read-only;
79 };
80  
81 factory: partition@40000 {
82 label = "factory";
83 reg = <0x40000 0x10000>;
84 read-only;
85 };
86  
87 partition@50000 {
88 compatible = "denx,uimage";
89 label = "firmware";
90 reg = <0x50000 0x3b0000>;
91 };
92 };
93 };
94 };
95  
96 &pinctrl {
97 state_default: pinctrl0 {
98 gpio {
99 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
100 ralink,function = "gpio";
101 };
102 };
103 };
104  
105 &ethernet {
106 mtd-mac-address = <&factory 0x4>;
107 };
108  
109 &esw {
110 mediatek,portmap = <0x3e>;
111 };
112  
113 &wmac {
114 ralink,mtd-eeprom = <&factory 0>;
115 };
116  
117 &otg {
118 status = "okay";
119 };