OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 office 3 #include "mt7620a.dtsi"
1 office 4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
3 office 9 compatible = "ravpower,wd03", "ralink,mt7620a-soc";
1 office 10 model = "Ravpower WD03";
11  
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15  
3 office 16 gpio-leds {
1 office 17 compatible = "gpio-leds";
18  
19 green-wifi {
20 label = "wd03:green:wifi";
21 gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
22 };
23  
24  
25 blue-wifi {
26 label = "wd03:blue:wifi";
27 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
28 };
29 };
30  
3 office 31 gpio-keys-polled {
1 office 32 compatible = "gpio-keys-polled";
3 office 33 #address-cells = <1>;
34 #size-cells = <0>;
1 office 35 poll-interval = <20>;
36  
37 reset {
38 label = "reset";
39 gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
40 linux,code = <KEY_RESTART>;
41 };
42 };
43 };
44  
45 &gpio2 {
46 status = "okay";
47 };
48  
49 &gpio3 {
50 status = "okay";
51 };
52  
53 &spi0 {
54 status = "okay";
55  
56 m25p80@0 {
3 office 57 #address-cells = <1>;
58 #size-cells = <1>;
1 office 59 compatible = "jedec,spi-nor";
60 reg = <0>;
61 spi-max-frequency = <10000000>;
62  
3 office 63 partition@0 {
64 label = "u-boot";
65 reg = <0x0 0x30000>;
66 read-only;
67 };
1 office 68  
3 office 69 partition@30000 {
70 label = "u-boot-env";
71 reg = <0x30000 0x10000>;
72 read-only;
73 };
1 office 74  
3 office 75 factory: partition@40000 {
76 label = "factory";
77 reg = <0x40000 0x10000>;
78 read-only;
79 };
1 office 80  
3 office 81 partition@50000 {
82 label = "firmware";
83 reg = <0x50000 0x7b0000>;
1 office 84 };
85 };
86 };
87  
88 &ehci {
89 status = "okay";
90 };
91  
92 &ohci {
93 status = "okay";
94 };
95  
96 &ethernet {
97 mtd-mac-address = <&factory 0x4000>;
98 ralink,port-map = "wllll";
99 };
100  
101 &wmac {
102 ralink,mtd-eeprom = <&factory 0>;
103 };
104  
105 &pinctrl {
106 state_default: pinctrl0 {
107 gpio {
108 ralink,group = "wled", "ephy";
109 ralink,function = "gpio";
110 };
111 };
112 };