OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 #include "mt7621.dtsi"
2  
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5  
6 / {
7 compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";
8  
9 chosen {
10 bootargs = "console=ttyS0,57600";
11 };
12  
13 keys {
14 compatible = "gpio-keys-polled";
15 poll-interval = <20>;
16  
17 reset {
18 label = "reset";
19 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
20 linux,code = <KEY_RESTART>;
21 };
22  
23 wps {
24 label = "wps";
25 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_WPS_BUTTON>;
27 };
28 };
29 };
30  
31 &xhci {
32 status = "okay";
33 };
34  
35 &spi0 {
36 status = "okay";
37  
38 m25p80@0 {
39 compatible = "jedec,spi-nor";
40 reg = <0>;
41 spi-max-frequency = <10000000>;
42  
43 partitions {
44 compatible = "fixed-partitions";
45 #address-cells = <1>;
46 #size-cells = <1>;
47  
48 partition@0 {
49 label = "u-boot";
50 reg = <0x0 0x30000>;
51 read-only;
52 };
53  
54 partition@30000 {
55 label = "u-boot-env";
56 reg = <0x30000 0x10000>;
57 read-only;
58 };
59  
60 factory: partition@40000 {
61 label = "factory";
62 reg = <0x40000 0x10000>;
63 read-only;
64 };
65  
66 partition@50000 {
67 compatible = "denx,uimage";
68 label = "firmware";
69 reg = <0x50000 0xfb0000>;
70 };
71 };
72 };
73 };
74  
75 &pcie {
76 status = "okay";
77 };
78  
79 &pcie0 {
80 wifi@0,0 {
81 compatible = "pci14c3,7603";
82 reg = <0x0000 0 0 0 0>;
83 mediatek,mtd-eeprom = <&factory 0x0000>;
84 };
85 };
86  
87 &pcie1 {
88 wifi@0,0 {
89 compatible = "pci14c3,7662";
90 reg = <0x0000 0 0 0 0>;
91 mediatek,mtd-eeprom = <&factory 0x8000>;
92 ieee80211-freq-limit = <5000000 6000000>;
93 };
94 };
95  
96 &ethernet {
97 mtd-mac-address = <&factory 0xe000>;
98 };
99  
100 &pinctrl {
101 state_default: pinctrl0 {
102 gpio {
103 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
104 ralink,function = "gpio";
105 };
106 };
107 };