OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7628an.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc";
10 model = "TP-Link TL-MR3020 v3";
11  
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18  
19 chosen {
20 bootargs = "console=ttyS0,115200";
21 };
22  
23 memory@0 {
24 device_type = "memory";
25 reg = <0x0 0x4000000>;
26 };
27  
28 keys {
29 compatible = "gpio-keys-polled";
30 poll-interval = <20>;
31  
32 wps {
33 label = "wps";
34 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_WPS_BUTTON>;
36 };
37  
38 modec1 {
39 label = "sw1";
40 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
41 linux,code = <BTN_0>;
42 };
43  
44 modec2 {
45 label = "sw2";
46 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
47 linux,code = <BTN_1>;
48 };
49 };
50  
51 leds {
52 compatible = "gpio-leds";
53  
54 led_power: power {
55 label = "tl-mr3020-v3:green:power";
56 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
57 default-state = "on";
58 };
59  
60 wan {
61 label = "tl-mr3020-v3:green:3g";
62 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
63 trigger-sources = <&ehci_port1>, <&ohci_port1>;
64 linux,default-trigger = "usbport";
65 };
66  
67 wlan {
68 label = "tl-mr3020-v3:green:wlan";
69 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
70 };
71  
72 wps {
73 label = "tl-mr3020-v3:green:wps";
74 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
75 };
76  
77 lan {
78 label = "tl-mr3020-v3:green:lan";
79 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
80 };
81 };
82 };
83  
84 &spi0 {
85 status = "okay";
86  
87 m25p80@0 {
88 compatible = "jedec,spi-nor";
89 reg = <0>;
90 spi-max-frequency = <10000000>;
91  
92 partitions {
93 compatible = "fixed-partitions";
94 #address-cells = <1>;
95 #size-cells = <1>;
96  
97 partition@0 {
98 label = "boot";
99 reg = <0x0 0x20000>;
100 read-only;
101 };
102  
103 partition@20000 {
104 compatible = "tplink,firmware";
105 label = "firmware";
106 reg = <0x20000 0x7a0000>;
107 };
108  
109 partition@7c0000 {
110 label = "config";
111 reg = <0x7c0000 0x10000>;
112 read-only;
113 };
114  
115 factory: partition@7d0000 {
116 label = "factory";
117 reg = <0x7d0000 0x30000>;
118 read-only;
119 };
120 };
121 };
122 };
123  
124 &ehci {
125 status = "okay";
126 };
127  
128 &ohci {
129 status = "okay";
130 };
131  
132 &pinctrl {
133 state_default: pinctrl0 {
134 gpio {
135 ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
136 ralink,function = "gpio";
137 };
138 };
139 };
140  
141 &wmac {
142 status = "okay";
143 mtd-mac-address = <&factory 0xf100>;
144 mediatek,mtd-eeprom = <&factory 0x20000>;
145 };
146  
147 &ethernet {
148 mtd-mac-address = <&factory 0xf100>;
149 };