OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include "mt7628an.dtsi"
5  
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8  
9 /{
10 compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
11 model = "SKYLAB SKW92A";
12  
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 };
17  
18 chosen {
19 bootargs = "console=ttyS0,57600";
20 };
21  
22 memory@0 {
23 device_type = "memory";
24 reg = <0x0 0x4000000>;
25 };
26  
27 leds {
28 compatible = "gpio-leds";
29  
30 led_power: wps {
31 label = "skw92a:green:wps";
32 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
33 };
34  
35 wlan {
36 label = "skw92a:green:wlan";
37 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
38 };
39 };
40  
41 keys {
42 compatible = "gpio-keys-polled";
43 poll-interval = <20>;
44  
45 reset {
46 label = "reset";
47 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
49 };
50 };
51 };
52  
53 &pinctrl {
54 state_default: pinctrl0 {
55 gpio {
56 ralink,group = "wdt", "refclk", "wled_an";
57 ralink,function = "gpio";
58 };
59 };
60 };
61  
62 &ethernet {
63 mtd-mac-address = <&factory 0x28>;
64 };
65  
66 &wmac {
67 status = "okay";
68 ralink,mtd-eeprom = <&factory 0x0>;
69 };
70  
71 &spi0 {
72 status = "okay";
73  
74 flash@0 {
75 compatible = "jedec,spi-nor";
76 reg = <0>;
77 spi-max-frequency = <10000000>;
78  
79 partitions {
80 compatible = "fixed-partitions";
81 #address-cells = <1>;
82 #size-cells = <1>;
83  
84 partition@0 {
85 label = "u-boot";
86 reg = <0x0 0x30000>;
87 read-only;
88 };
89  
90 partition@30000 {
91 label = "u-boot-env";
92 reg = <0x30000 0x10000>;
93 read-only;
94 };
95  
96 factory: partition@40000 {
97 label = "factory";
98 reg = <0x40000 0x10000>;
99 read-only;
100 };
101  
102 partition@50000 {
103 label = "firmware";
104 reg = <0x50000 0xfb0000>;
105 compatible = "denx,uimage";
106 };
107 };
108 };
109 };
110  
111 &uart1 {
112 status = "okay";
113 };
114  
115 &ehci {
116 status = "okay";
117 };
118  
119 &ohci {
120 status = "okay";
121 };