OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "asus,rp-n53", "ralink,mt7620a-soc";
10 model = "Asus RP-N53";
11  
12 keys {
13 compatible = "gpio-keys-polled";
14 poll-interval = <20>;
15  
16 touch {
17 label = "touch";
18 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
19 linux,code = <BTN_0>;
20 };
21  
22 wps {
23 label = "wps";
24 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
25 linux,code = <BTN_0>;
26 };
27  
28 reset {
29 label = "reset";
30 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
31 linux,code = <BTN_0>;
32 };
33  
34 audio {
35 label = "audio";
36 gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
37 linux,code = <BTN_1>;
38 };
39 };
40  
41 leds {
42 compatible = "gpio-leds";
43  
44 backlight {
45 label = "rp-n53:white:back";
46 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
47 };
48  
49 wifi0 {
50 label = "rp-n53:blue:5g3";
51 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
52 };
53  
54 wifi1 {
55 label = "rp-n53:blue:5g2";
56 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
57 };
58  
59 wifi2 {
60 label = "rp-n53:blue:5g1";
61 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
62 };
63  
64 wifi3 {
65 label = "rp-n53:blue:wifi";
66 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
67 };
68  
69 wifi4 {
70 label = "rp-n53:blue:2g1";
71 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
72 };
73  
74 wifi5 {
75 label = "rp-n53:blue:2g2";
76 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
77 };
78  
79 wifi6 {
80 label = "rp-n53:blue:2g3";
81 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
82 };
83 };
84 };
85  
86 &gpio1 {
87 status = "okay";
88 };
89  
90 &i2c {
91 status = "okay";
92 };
93  
94 &i2s {
95 status = "okay";
96 pinctrl-names = "default";
97 pinctrl-0 = <&pcm_i2s_pins>;
98 };
99  
100 &spi0 {
101 status = "okay";
102  
103 m25p80@0 {
104 compatible = "jedec,spi-nor";
105 reg = <0>;
106 spi-max-frequency = <10000000>;
107  
108 partitions {
109 compatible = "fixed-partitions";
110 #address-cells = <1>;
111 #size-cells = <1>;
112  
113 partition@0 {
114 label = "u-boot";
115 reg = <0x0 0x30000>;
116 read-only;
117 };
118  
119 partition@30000 {
120 label = "u-boot-env";
121 reg = <0x30000 0x10000>;
122 read-only;
123 };
124  
125 factory: partition@40000 {
126 label = "factory";
127 reg = <0x40000 0x10000>;
128 read-only;
129 };
130  
131 partition@50000 {
132 compatible = "denx,uimage";
133 label = "firmware";
134 reg = <0x50000 0x7b0000>;
135 };
136 };
137 };
138 };
139  
140 &pcm {
141 status = "okay";
142 };
143  
144 &gdma {
145 status = "okay";
146 };
147  
148 &wmac {
149 ralink,mtd-eeprom = <&factory 0>;
150 };
151  
152 &pinctrl {
153 state_default: pinctrl0 {
154 gpio {
155 ralink,group = "mdio", "rgmii1";
156 ralink,function = "gpio";
157 };
158 };
159 };
160  
161 &gsw {
162 mediatek,port4 = "ephy";
163 pinctrl-names = "default";
164 pinctrl-0 = <&ephy_pins>;
165 };
166  
167 &pcie {
168 status = "okay";
169 };
170  
171 &pcie0 {
172 wifi@0,0 {
173 compatible = "pci1814,5592";
174 reg = <0x0000 0 0 0 0>;
175 ralink,2ghz = <0>;
176 ralink,mtd-eeprom = <&factory 0x8000>;
177 };
178 };