OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7621.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/gpio/gpio.h>
7  
8 / {
9 compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc";
10 model = "MikroTik RouterBOARD M33G";
11  
12 aliases {
13 led-boot = &led_usr;
14 led-failsafe = &led_usr;
15 led-running = &led_usr;
16 led-upgrade = &led_usr;
17 };
18  
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x10000000>;
22 };
23  
24 chosen {
25 bootargs = "console=ttyS0,115200";
26 };
27  
28 leds {
29 compatible = "gpio-leds";
30  
31 led_usr: usr {
32 label = "rbm33g:green:usr";
33 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
34 };
35 };
36  
37 keys {
38 compatible = "gpio-keys-polled";
39 poll-interval = <20>;
40  
41 res {
42 label = "res";
43 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
45 };
46 };
47  
48 pcie0_vcc_reg {
49 compatible = "regulator-fixed";
50 regulator-name = "pcie0_vcc";
51  
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
55 enable-active-high;
56 regulator-boot-on;
57 regulator-always-on;
58 };
59  
60 pcie1_vcc_reg {
61 compatible = "regulator-fixed";
62 regulator-name = "pcie1_vcc";
63  
64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <3300000>;
66 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
67 enable-active-high;
68 regulator-boot-on;
69 regulator-always-on;
70 };
71  
72 pcie2_vcc_reg {
73 compatible = "regulator-fixed";
74 regulator-name = "pcie2_vcc";
75  
76 regulator-min-microvolt = <3300000>;
77 regulator-max-microvolt = <3300000>;
78 gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
79 enable-active-high;
80 regulator-boot-on;
81 regulator-always-on;
82 };
83  
84 usb_vcc_reg {
85 compatible = "regulator-fixed";
86 regulator-name = "usb_vcc";
87  
88 regulator-min-microvolt = <5000000>;
89 regulator-max-microvolt = <5000000>;
90 gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
91 enable-active-high;
92 regulator-always-on;
93 };
94 };
95  
96  
97 &spi0 {
98 status = "okay";
99  
100 w25q40@0 {
101 compatible = "jedec,spi-nor";
102 reg = <0>;
103 spi-max-frequency = <3125000>;
104  
105 partitions {
106 compatible = "fixed-partitions";
107 #address-cells = <1>;
108 #size-cells = <1>;
109  
110 partition@0 {
111 label = "RouterBoot";
112 reg = <0x0 0x40000>;
113 read-only;
114 compatible = "fixed-partitions";
115 #address-cells = <1>;
116 #size-cells = <1>;
117  
118 partition@0 {
119 label = "bootloader1";
120 reg = <0x0 0xf000>;
121 read-only;
122 };
123  
124 hard_config: partition@f000 {
125 label = "hard_config";
126 reg = <0xf000 0x1000>;
127 read-only;
128 };
129  
130 partition@10000 {
131 label = "bootloader2";
132 reg = <0x10000 0xf000>;
133 read-only;
134 };
135  
136 partition@20000 {
137 label = "soft_config";
138 reg = <0x20000 0x1000>;
139 };
140  
141 partition@30000 {
142 label = "bios";
143 reg = <0x30000 0x1000>;
144 read-only;
145 };
146 };
147 };
148 };
149  
150 w25q128@1 {
151 compatible = "jedec,spi-nor";
152 reg = <1>;
153 // XXX empiric value to obtain actual 10MHz SCK at the chip
154 spi-max-frequency = <3125000>;
155  
156 partitions {
157 compatible = "fixed-partitions";
158 #address-cells = <1>;
159 #size-cells = <1>;
160  
161 // Region <0x0 0x40000> seems reserved by OEM
162  
163 partition@40000 {
164 compatible = "mikrotik,minor";
165 label = "firmware";
166 reg = <0x040000 0xFC0000>;
167 };
168 };
169 };
170 };
171  
172 &ethernet {
173 mtd-mac-address = <&hard_config 0x0010>;
174 mtd-mac-address-increment = <1>;
175 };
176  
177  
178 &pinctrl {
179 state_default: pinctrl0 {
180 gpio {
181 ralink,group = "uart2", "wdt";
182 ralink,function = "gpio";
183 };
184 };
185 };
186  
187 &sdhci {
188 status = "okay";
189 };
190  
191 &i2c {
192 status = "okay";
193 };
194  
195 &pcie {
196 status = "okay";
197 };