OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
10 model = "Planex MZK-750DHP";
11  
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18  
19 leds {
20 compatible = "gpio-leds";
21  
22 wps {
23 label = "mzk-750dhp:green:wps";
24 gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
25 };
26  
27 led_power: power {
28 label = "mzk-750dhp:green:power";
29 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
30 };
31  
32 wlan5g {
33 label = "mzk-750dhp:green:wlan5g";
34 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
35 };
36 };
37  
38 keys {
39 compatible = "gpio-keys-polled";
40 poll-interval = <20>;
41  
42 s1 {
43 label = "reset";
44 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_RESTART>;
46 };
47  
48 s2 {
49 label = "wps";
50 gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_WPS_BUTTON>;
52 };
53 };
54 };
55  
56 &gpio1 {
57 status = "okay";
58 };
59  
60 &gpio2 {
61 status = "okay";
62 };
63  
64 &spi0 {
65 status = "okay";
66  
67 m25p80@0 {
68 compatible = "jedec,spi-nor";
69 reg = <0>;
70 spi-max-frequency = <10000000>;
71  
72 partitions {
73 compatible = "fixed-partitions";
74 #address-cells = <1>;
75 #size-cells = <1>;
76  
77 partition@0 {
78 label = "u-boot";
79 reg = <0x0 0x30000>;
80 read-only;
81 };
82  
83 partition@30000 {
84 label = "u-boot-env";
85 reg = <0x30000 0x10000>;
86 read-only;
87 };
88  
89 factory: partition@40000 {
90 label = "factory";
91 reg = <0x40000 0x10000>;
92 read-only;
93 };
94  
95 partition@50000 {
96 compatible = "denx,uimage";
97 label = "firmware";
98 reg = <0x50000 0x7b0000>;
99 };
100 };
101 };
102 };
103  
104 &pinctrl {
105 state_default: pinctrl0 {
106 gpio {
107 ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
108 ralink,function = "gpio";
109 };
110 };
111 };
112  
113 &ethernet {
114 pinctrl-names = "default";
115 pinctrl-0 = <&ephy_pins>;
116 mtd-mac-address = <&factory 0x4>;
117 mediatek,portmap = "llllw";
118 };
119  
120 &gsw {
121 mediatek,port4 = "ephy";
122 };
123  
124 &wmac {
125 ralink,mtd-eeprom = <&factory 0>;
126 };
127  
128 &pcie {
129 status = "okay";
130 };
131  
132 &pcie0 {
133 mt76@0,0 {
134 reg = <0x0000 0 0 0 0>;
135 mediatek,mtd-eeprom = <&factory 0x8000>;
136 };
137 };