OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "glinet,gl-mt300a", "ralink,mt7620a-soc";
10 model = "GL-MT300A";
11  
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15  
16 leds {
17 compatible = "gpio-leds";
18  
19 wan {
20 label = "gl-mt300a:wan";
21 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
22 };
23  
24 lan {
25 label = "gl-mt300a:lan";
26 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
27 };
28  
29 wlan {
30 label = "gl-mt300a:wlan";
31 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
32 };
33  
34 usb {
35 label = "gl-mt300a:usb";
36 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
37 };
38 };
39  
40 keys {
41 compatible = "gpio-keys-polled";
42 poll-interval = <20>;
43 reset {
44 label = "reset";
45 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
46 linux,code = <KEY_RESTART>;
47 };
48  
49 BTN_0 {
50 label = "BTN_0";
51 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
52 linux,code = <BTN_0>;
53 };
54  
55 BTN_1 {
56 label = "BTN_1";
57 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
58 linux,code = <BTN_1>;
59 };
60 };
61 };
62  
63 &gpio0 {
64 status = "okay";
65 };
66  
67 &gpio1 {
68 status = "okay";
69 };
70  
71 &gpio2 {
72 status = "okay";
73 };
74  
75 &gpio3 {
76 status = "okay";
77 };
78  
79 &spi0 {
80 status = "okay";
81  
82 m25p80@0 {
83 compatible = "jedec,spi-nor";
84 reg = <0>;
85 spi-max-frequency = <10000000>;
86  
87 partitions {
88 compatible = "fixed-partitions";
89 #address-cells = <1>;
90 #size-cells = <1>;
91  
92 partition@0 {
93 label = "u-boot";
94 reg = <0x0 0x30000>;
95 };
96  
97 partition@30000 {
98 label = "u-boot-env";
99 reg = <0x30000 0x10000>;
100 read-only;
101 };
102  
103 factory: partition@40000 {
104 label = "factory";
105 reg = <0x40000 0x10000>;
106 read-only;
107 };
108  
109 partition@50000 {
110 compatible = "denx,uimage";
111 label = "firmware";
112 reg = <0x50000 0xf80000>;
113 };
114  
115 partition@ff0000 {
116 label = "art";
117 reg = <0xff0000 0x10000>;
118 };
119 };
120 };
121 };
122  
123 &sdhci {
124 status = "okay";
125 };
126  
127 &ehci {
128 status = "okay";
129 };
130  
131 &ohci {
132 status = "okay";
133 };
134  
135 &ethernet {
136 mtd-mac-address = <&factory 0x4000>;
137 mediatek,portmap = "wllll";
138 };
139  
140 &wmac {
141 ralink,mtd-eeprom = <&factory 0>;
142 };
143  
144 &pinctrl {
145 state_default: pinctrl0 {
146 gpio {
147 ralink,group = "wled","ephy","uartf","i2c";
148 ralink,function = "gpio";
149 };
150 };
151 };