OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7621.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc";
10 model = "GB-PC1";
11  
12 aliases {
13 led-boot = &led_status;
14 led-failsafe = &led_status;
15 led-running = &led_status;
16 led-upgrade = &led_status;
17 };
18  
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
22 };
23  
24 chosen {
25 bootargs = "console=ttyS0,57600";
26 };
27  
28 keys {
29 compatible = "gpio-keys-polled";
30 poll-interval = <20>;
31  
32 reset {
33 label = "reset";
34 gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
35 linux,code = <KEY_RESTART>;
36 };
37 };
38  
39 leds {
40 compatible = "gpio-leds";
41  
42 system {
43 label = "gb-pc1:green:system";
44 gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
45 };
46  
47 led_status: status {
48 label = "gb-pc1:green:status";
49 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
50 };
51  
52 lan1 {
53 label = "gb-pc1:green:lan1";
54 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
55 };
56  
57 lan2 {
58 label = "gb-pc1:green:lan2";
59 gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
60 };
61 };
62 };
63  
64 &sdhci {
65 status = "okay";
66 };
67  
68 &spi0 {
69 status = "okay";
70  
71 m25p80@0 {
72 compatible = "jedec,spi-nor";
73 reg = <0>;
74 spi-max-frequency = <10000000>;
75  
76 partitions {
77 compatible = "fixed-partitions";
78 #address-cells = <1>;
79 #size-cells = <1>;
80  
81 partition@0 {
82 label = "u-boot";
83 reg = <0x0 0x30000>;
84 read-only;
85 };
86  
87 partition@30000 {
88 label = "u-boot-env";
89 reg = <0x30000 0x10000>;
90 read-only;
91 };
92  
93 factory: partition@40000 {
94 label = "factory";
95 reg = <0x40000 0x10000>;
96 read-only;
97 };
98  
99 partition@50000 {
100 compatible = "denx,uimage";
101 label = "firmware";
102 reg = <0x50000 0x1fb0000>;
103 };
104 };
105 };
106 };
107  
108 &pcie {
109 status = "okay";
110 };
111  
112 &ethernet {
113 mtd-mac-address = <&factory 0xe000>;
114 };
115  
116 &pinctrl {
117 state_default: pinctrl0 {
118 gpio {
119 ralink,group = "jtag", "rgmii2", "uart3", "wdt";
120 ralink,function = "gpio";
121 };
122 };
123 };