OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7628an.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "duzun,dm06", "mediatek,mt7628an-soc";
10 model = "DuZun DM06";
11  
12 memory@0 {
13 device_type = "memory";
14 reg = <0x0 0x4000000>;
15 };
16  
3 office 17 gpio-keys-polled {
1 office 18 compatible = "gpio-keys-polled";
3 office 19 #address-cells = <1>;
20 #size-cells = <0>;
1 office 21 poll-interval = <100>;
22  
23 reset {
24 label = "reset";
25 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 };
28  
29 wps {
30 label = "wps";
31 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_WPS_BUTTON>;
33 };
34 };
35  
36 sound {
37 compatible = "simple-audio-card";
38 simple-audio-card,name = "Audio-I2S";
39 simple-audio-card,format = "i2s";
40 simple-audio-card,bitclock-master = <&dailink0_master>;
41 simple-audio-card,frame-master = <&dailink0_master>;
42 simple-audio-card,widgets =
43 "Headphone", "Headphones";
44 simple-audio-card,routing =
45 "Headphones", "HP_L",
46 "Headphones", "HP_R";
47 simple-audio-card,mclk-fs = <256>;
48  
49 simple-audio-card,cpu {
50 sound-dai = <&i2s>;
51 };
52  
53 dailink0_master: simple-audio-card,codec {
54 sound-dai = <&codec>;
55 };
56 };
57 };
58  
59 &pinctrl {
60 state_default: pinctrl0 {
61 gpio {
62 ralink,group = "wdt", "uart1";
63 ralink,function = "gpio";
64 };
65 };
66 };
67  
68 &gpio1 {
69 status = "okay";
70 };
71  
72 &i2c {
73 status = "okay";
74  
75 codec: wm8960@1a {
76 #sound-dai-cells = <0>;
77 compatible = "wlf,wm8960";
78 reg = <0x1a>;
79  
80 wlf,shared-lrclk;
81 };
82 };
83  
84 &ethernet {
85 mtd-mac-address = <&factory 0x4>;
86 };
87  
88 &esw {
89 mediatek,portmap = <0x3>;
90 mediatek,portdisable = <0x3c>;
91 };
92  
93 &i2s {
94 #sound-dai-cells = <0>;
95 status = "okay";
96 pinctrl-names = "default";
97 pinctrl-0 = <&i2s_pins>, <&refclk_pins>;
98 };
99  
100 &sdhci {
101 status = "okay";
102 };
103  
104 &gdma {
105 status = "okay";
106 };
107  
108 &spi0 {
109 status = "okay";
110  
111 m25p80@0 {
3 office 112 #address-cells = <1>;
113 #size-cells = <1>;
1 office 114 compatible = "jedec,spi-nor";
115 reg = <0>;
116 spi-max-frequency = <60000000>;
3 office 117 m25p,chunked-io = <32>;
1 office 118 m25p,fast-read;
119  
3 office 120 partition@0 {
121 label = "u-boot";
122 reg = <0x0 0x30000>;
123 read-only;
124 };
1 office 125  
3 office 126 partition@30000 {
127 label = "u-boot-env";
128 reg = <0x30000 0x10000>;
129 read-only;
130 };
1 office 131  
3 office 132 factory: partition@40000 {
133 label = "factory";
134 reg = <0x40000 0x10000>;
135 read-only;
136 };
1 office 137  
3 office 138 partition@50000 {
139 label = "firmware";
140 reg = <0x50000 0x7b0000>;
1 office 141 };
142 };
143 };