OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "rt3050.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "dlink,dcs-930", "ralink,rt3050-soc";
10 model = "D-Link DCS-930";
11  
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x400000>;
15 bank-width = <2>;
16 device-width = <2>;
3 office 17 #address-cells = <1>;
18 #size-cells = <1>;
1 office 19  
3 office 20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
1 office 25  
3 office 26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
1 office 31  
3 office 32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
1 office 37  
3 office 38 partition@50000 {
39 label = "kernel";
40 reg = <0x50000 0x150000>;
41 };
1 office 42  
3 office 43 partition@150000 {
44 label = "rootfs";
45 reg = <0x150000 0x2b0000>;
1 office 46 };
3 office 47  
48 partition {
49 label = "firmware";
50 reg = <0x50000 0x3b0000>;
51 };
1 office 52 };
53  
3 office 54 gpio-leds {
1 office 55 compatible = "gpio-leds";
56  
57 wifi {
58 label = "dcs-930:red:alert";
59 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
60 };
61  
3 office 62 power {
1 office 63 label = "dcs-930:green:status";
64 gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
65 };
66  
67 wps {
68 label = "dcs-930:blue:wps";
69 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
70 };
71 };
72  
3 office 73 gpio-keys-polled {
1 office 74 compatible = "gpio-keys-polled";
3 office 75 #address-cells = <1>;
76 #size-cells = <0>;
1 office 77 poll-interval = <20>;
78  
79 wps {
80 label = "wps";
81 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
82 linux,code = <BTN_1>;
83 };
84  
85 reset {
86 label = "reset";
87 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
88 linux,code = <KEY_RESTART>;
89 };
90 };
91 };
92  
93 &pinctrl {
94 state_default: pinctrl0 {
95 gpio {
96 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
97 ralink,function = "gpio";
98 };
99 };
100 };
101  
102 &ethernet {
103 mtd-mac-address = <&factory 0x4>;
104 };
105  
106 &esw {
107 mediatek,portmap = <0x2f>;
108 };
109  
110 &wmac {
111 ralink,mtd-eeprom = <&factory 0>;
112 };
113  
114 &otg {
115 status = "okay";
116 };