OpenWrt – Blame information for rev 3

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "planex,db-wrt01", "ralink,mt7620a-soc";
10 model = "Planex DB-WRT01";
11  
3 office 12 gpio-leds {
1 office 13 compatible = "gpio-leds";
14  
3 office 15 power {
1 office 16 label = "db-wrt01:orange:power";
17 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
18 };
19 };
20  
3 office 21 gpio-keys-polled {
1 office 22 compatible = "gpio-keys-polled";
3 office 23 #address-cells = <1>;
24 #size-cells = <0>;
1 office 25 poll-interval = <20>;
26  
27 s1 {
28 label = "wps";
29 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
30 linux,code = <KEY_WPS_BUTTON>;
31 };
32 };
33 };
34  
35 &gpio1 {
36 status = "okay";
37 };
38  
39 &spi0 {
40 status = "okay";
41  
42 m25p80@0 {
3 office 43 #address-cells = <1>;
44 #size-cells = <1>;
1 office 45 compatible = "jedec,spi-nor";
46 reg = <0>;
47 spi-max-frequency = <10000000>;
48  
3 office 49 partition@0 {
50 label = "u-boot";
51 reg = <0x0 0x30000>;
52 read-only;
53 };
1 office 54  
3 office 55 partition@30000 {
56 label = "u-boot-env";
57 reg = <0x30000 0x10000>;
58 read-only;
59 };
1 office 60  
3 office 61 factory: partition@40000 {
62 label = "factory";
63 reg = <0x40000 0x10000>;
64 read-only;
65 };
1 office 66  
3 office 67 partition@50000 {
68 label = "firmware";
69 reg = <0x50000 0x7b0000>;
1 office 70 };
71 };
72 };
73  
74 &pinctrl {
75 state_default: pinctrl0 {
76 gpio {
77 ralink,group = "i2c", "spi refclk", "rgmii1";
78 ralink,function = "gpio";
79 };
80 };
81 };
82  
83 &ethernet {
84 pinctrl-names = "default";
85 pinctrl-0 = <&ephy_pins>;
86 mtd-mac-address = <&factory 0x4>;
87 mediatek,portmap = "llllw";
88 };
89  
90 &gsw {
91 mediatek,port4 = "ephy";
92 };
93  
94 &wmac {
95 ralink,mtd-eeprom = <&factory 0>;
96 };
3 office 97  
98 &pcie {
99 status = "okay";
100 };