OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include "mt7621.dtsi"
5  
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8  
9 / {
10 compatible = "xzwifi,creativebox-v1", "mediatek,mt7621-soc";
11 model = "CreativeBox v1";
12  
13 aliases {
14 led-boot = &led_sys;
15 led-failsafe = &led_sys;
16 led-running = &led_sys;
17 led-upgrade = &led_sys;
18 };
19  
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x1C000000>,
23 <0x20000000 0x4000000>;
24 };
25  
26 chosen {
27 bootargs = "console=ttyS0,115200";
28 };
29  
30 leds {
31 compatible = "gpio-leds";
32  
33 power {
34 label = "creativebox-v1:blue:power";
35 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
36 default-state = "on";
37 };
38  
39 led_sys: sys {
40 label = "creativebox-v1:blue:sys";
41 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
42 };
43  
44 internet {
45 label = "creativebox-v1:blue:internet";
46 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
47 };
48  
49 wlan2g {
50 label = "creativebox-v1:blue:wlan2g";
51 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
52 linux,default-trigger = "phy0tpt";
53 };
54  
55 wlan5g {
56 label = "creativebox-v1:blue:wlan5g";
57 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
58 linux,default-trigger = "phy1tpt";
59 };
60 };
61  
62 keys {
63 compatible = "gpio-keys-polled";
64 poll-interval = <20>;
65  
66 reset {
67 label = "reset";
68 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
69 linux,code = <KEY_RESTART>;
70 };
71 };
72  
73 gpio_export {
74 compatible = "gpio-export";
75 #size-cells = <0>;
76  
77 power_usb2 {
78 gpio-export,name = "power_usb2";
79 gpio-export,output = <1>;
80 gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
81 };
82  
83 power_usb3 {
84 gpio-export,name = "power_usb3";
85 gpio-export,output = <1>;
86 gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
87 };
88  
89 power_sata {
90 gpio-export,name = "power_sata";
91 gpio-export,output = <1>;
92 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
93 };
94 };
95 };
96  
97 &spi0 {
98 status = "okay";
99  
100 flash@0 {
101 compatible = "jedec,spi-nor";
102 reg = <0>;
103 spi-max-frequency = <40000000>;
104  
105 partitions {
106 compatible = "fixed-partitions";
107 #address-cells = <1>;
108 #size-cells = <1>;
109  
110 partition@0 {
111 label = "u-boot";
112 reg = <0x0 0x30000>;
113 read-only;
114 };
115  
116 partition@30000 {
117 label = "u-boot-env";
118 reg = <0x30000 0x10000>;
119 read-only;
120 };
121  
122 factory: partition@40000 {
123 label = "factory";
124 reg = <0x40000 0x10000>;
125 read-only;
126 };
127  
128 partition@50000 {
129 compatible = "denx,uimage";
130 label = "firmware";
131 reg = <0x50000 0x1fb0000>;
132 };
133 };
134 };
135 };
136  
137 &sdhci {
138 status = "okay";
139 };
140  
141 &pcie {
142 status = "okay";
143 };
144  
145 &pcie0 {
146 wifi@0,0 {
147 compatible = "pci1400,7603";
148 reg = <0x0000 0 0 0 0>;
149 mediatek,mtd-eeprom = <&factory 0x0000>;
150 };
151 };
152  
153 &pcie1 {
154 wifi@0,0 {
155 compatible = "pci14c3,7662";
156 reg = <0x0000 0 0 0 0>;
157 mediatek,mtd-eeprom = <&factory 0x8000>;
158 ieee80211-freq-limit = <5000000 6000000>;
159 };
160 };
161  
162 &ethernet {
163 mtd-mac-address = <&factory 0xe000>;
164 };
165  
166 &pinctrl {
167 state_default: pinctrl0 {
168 gpio {
169 ralink,group = "wdt", "rgmii2";
170 ralink,function = "gpio";
171 };
172 };
173 };