OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "mt7620a.dtsi"
4  
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7  
8 / {
9 compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
10 model = "YUKAI Engineering BOCCO";
11  
12 keys {
13 compatible = "gpio-keys-polled";
14 poll-interval = <20>;
15  
16 reset {
17 label = "reset";
18 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
19 linux,code = <KEY_RESTART>;
20 };
21 };
22  
23 gpio_export {
24 compatible = "gpio-export";
25 #size-cells = <0>;
26  
27 s1 {
28 gpio-export,name = "rec";
29 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
30 };
31 s2 {
32 gpio-export,name = "play";
33 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
34 };
35 };
36  
37 sound {
38 compatible = "simple-audio-card";
39 simple-audio-card,name = "Audio-I2S";
40 simple-audio-card,format = "i2s";
41 simple-audio-card,bitclock-master = <&dailink0_master>;
42 simple-audio-card,frame-master = <&dailink0_master>;
43 simple-audio-card,widgets =
44 "Headphone", "Headphones";
45 simple-audio-card,routing =
46 "Headphones", "HP_L",
47 "Headphones", "HP_R";
48 simple-audio-card,mclk-fs = <256>;
49  
50 simple-audio-card,cpu {
51 sound-dai = <&i2s>;
52 };
53  
54 dailink0_master: simple-audio-card,codec {
55 sound-dai = <&codec>;
56 };
57 };
58 };
59  
60 &gpio0 {
61 status = "okay";
62 };
63  
64 &gpio1 {
65 status = "okay";
66 };
67  
68 &gpio2 {
69 status = "okay";
70 };
71  
72 &gpio3 {
73 status = "okay";
74 };
75  
76 &i2c {
77 status = "okay";
78  
79 codec: wm8960@1a {
80 #sound-dai-cells = <0>;
81 compatible = "wlf,wm8960";
82 reg = <0x1a>;
83  
84 wlf,shared-lrclk;
85 };
86 };
87  
88 &i2s {
89 #sound-dai-cells = <0>;
90 status = "okay";
91 pinctrl-names = "default";
92 pinctrl-0 = <&pcm_i2s_pins>;
93 };
94  
95 &spi0 {
96 status = "okay";
97  
98 m25p80@0 {
99 compatible = "jedec,spi-nor";
100 reg = <0>;
101 spi-max-frequency = <10000000>;
102  
103 partitions {
104 compatible = "fixed-partitions";
105 #address-cells = <1>;
106 #size-cells = <1>;
107  
108 partition@0 {
109 label = "u-boot";
110 reg = <0x0 0x30000>;
111 read-only;
112 };
113  
114 partition@30000 {
115 label = "u-boot-env";
116 reg = <0x30000 0x10000>;
117 read-only;
118 };
119  
120 factory: partition@40000 {
121 label = "factory";
122 reg = <0x40000 0x10000>;
123 read-only;
124 };
125  
126 partition@50000 {
127 compatible = "denx,uimage";
128 label = "firmware";
129 reg = <0x50000 0x7b0000>;
130 };
131 };
132 };
133 };
134  
135 &pcm {
136 status = "okay";
137 };
138  
139 &gdma {
140 status = "okay";
141 };
142  
143 &pinctrl {
144 state_default: pinctrl0 {
145 gpio {
146 ralink,group = "spi refclk", "rgmii1";
147 ralink,function = "gpio";
148 };
149 };
150 };
151  
152 &ethernet {
153 pinctrl-names = "default";
154 pinctrl-0 = <&ephy_pins>;
155 mtd-mac-address = <&factory 0x4>;
156 mediatek,portmap = "llllw";
157 };
158  
159 &gsw {
160 ralink,port4 = "ephy";
161 };
162  
163 &wmac {
164 ralink,mtd-eeprom = <&factory 0>;
165 };