OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "TPLINK-8M.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/gpio/gpio.h>
7  
8 / {
9 compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
10 model = "TP-Link Archer C20 v4";
11  
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18  
19 leds {
20 compatible = "gpio-leds";
21  
22 lan {
23 label = "c20-v4:green:lan";
24 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
25 };
26  
27 led_power: power {
28 label = "c20-v4:green:power";
29 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
30 };
31  
32 wan {
33 label = "c20-v4:green:wan";
34 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
35 };
36  
37 wan_orange {
38 label = "c20-v4:orange:wan";
39 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
40 };
41  
42 wlan5g {
43 label = "c20-v4:green:wlan5g";
44 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
45 };
46  
47 wlan2g {
48 label = "c20-v4:green:wlan2g";
49 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
50 };
51  
52 wps {
53 label = "c20-v4:green:wps";
54 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
55 };
56 };
57  
58 keys {
59 compatible = "gpio-keys-polled";
60 poll-interval = <20>;
61  
62 reset {
63 label = "reset";
64 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_RESTART>;
66 };
67  
68 rfkill {
69 label = "rfkill";
70 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_RFKILL>;
72 };
73 };
74 };
75  
76 &wmac {
77 mtd-mac-address-increment = <(-2)>;
78 };
79  
80 &ethernet {
81 mediatek,portmap = "wllll";
82 };
83  
84 &pinctrl {
85 state_default: pinctrl0 {
86 gpio {
87 ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
88 ralink,function = "gpio";
89 };
90 };
91 };
92  
93 &pcie {
94 status = "okay";
95 };
96  
97 &pcie0 {
98 mt76@0,0 {
99 reg = <0x0000 0 0 0 0>;
100 mediatek,mtd-eeprom = <&factory 0x28000>;
101 ieee80211-freq-limit = <5000000 6000000>;
102 mtd-mac-address = <&factory 0xf100>;
103 mtd-mac-address-increment = <(-1)>;
104 };
105 };