OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 #include "vr9.dtsi"
2  
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
5  
6 / {
7 compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
8 model = "AVM FRITZ!Box 3370 Rev. 2";
9  
10 chosen {
11 bootargs = "console=ttyLTQ0,115200";
12 };
13  
14 aliases {
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
18 led-upgrade = &power_green;
19  
20 led-dsl = &dsl;
21 led-internet = &info_green;
22 led-wifi = &wifi;
23 };
24  
25 memory@0 {
26 reg = <0x0 0x8000000>;
27 };
28  
29 gpio-poweroff {
30 compatible = "gpio-poweroff";
31 gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
32 };
33  
34 gpio-keys-polled {
35 compatible = "gpio-keys-polled";
36 #address-cells = <1>;
37 #size-cells = <0>;
38 poll-interval = <100>;
39  
40 power {
41 label = "power";
42 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
43 linux,code = <KEY_POWER>;
44 };
45  
46 wifi {
47 label = "wlan";
48 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
49 linux,code = <KEY_WLAN>;
50 };
51 };
52  
53 gpio-leds {
54 compatible = "gpio-leds";
55  
56 power_green: power {
57 label = "fritz3370:green:power";
58 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
59 default-state = "keep";
60 };
61  
62 power_red: power2 {
63 label = "fritz3370:red:power";
64 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
65 };
66  
67 info_red {
68 label = "fritz3370:red:info";
69 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
70 };
71  
72 wifi: wifi {
73 label = "fritz3370:green:wlan";
74 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
75 };
76  
77 dsl: dsl {
78 label = "fritz3370:green:dsl";
79 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
80 };
81  
82 lan {
83 label = "fritz3370:green:lan";
84 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
85 };
86  
87 info_green: info_green {
88 label = "fritz3370:green:info";
89 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
90 };
91 };
92  
93 usb0_vbus: regulator-usb0-vbus {
94 compatible = "regulator-fixed";
95  
96 regulator-name = "USB0_VBUS";
97  
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
100  
101 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
102 enable-active-high;
103 };
104  
105 usb1_vbus: regulator-usb1-vbus {
106 compatible = "regulator-fixed";
107  
108 regulator-name = "USB1_VBUS";
109  
110 regulator-min-microvolt = <5000000>;
111 regulator-max-microvolt = <5000000>;
112  
113 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
114 enable-active-high;
115 };
116 };
117  
118 &eth0 {
119 lan: interface@0 {
120 compatible = "lantiq,xrx200-pdi";
121 #address-cells = <1>;
122 #size-cells = <0>;
123 reg = <0>;
124 lantiq,switch;
125  
126 ethernet@0 {
127 compatible = "lantiq,xrx200-pdi-port";
128 reg = <0>;
129 phy-mode = "rgmii";
130 phy-handle = <&phy0>;
131 gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
132 };
133  
134 ethernet@1 {
135 compatible = "lantiq,xrx200-pdi-port";
136 reg = <1>;
137 phy-mode = "rgmii";
138 phy-handle = <&phy1>;
139 gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
140 };
141  
142 ethernet@2 {
143 compatible = "lantiq,xrx200-pdi-port";
144 reg = <2>;
145 phy-mode = "gmii";
146 phy-handle = <&phy11>;
147 };
148  
149 ethernet@4 {
150 compatible = "lantiq,xrx200-pdi-port";
151 reg = <4>;
152 phy-mode = "gmii";
153 phy-handle = <&phy13>;
154 };
155 };
156  
157 mdio@0 {
158 #address-cells = <1>;
159 #size-cells = <0>;
160 compatible = "lantiq,xrx200-mdio";
161 reg = <0>;
162  
163 phy0: ethernet-phy@0 {
164 reg = <0x0>;
165 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
166 };
167  
168 phy1: ethernet-phy@1 {
169 reg = <0x1>;
170 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
171 };
172  
173 phy11: ethernet-phy@11 {
174 reg = <0x11>;
175 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
176 };
177  
178 phy13: ethernet-phy@13 {
179 reg = <0x13>;
180 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
181 };
182 };
183 };
184  
185 &gphy0 {
186 lantiq,gphy-mode = <GPHY_MODE_GE>;
187 };
188  
189 &gphy1 {
190 lantiq,gphy-mode = <GPHY_MODE_GE>;
191 };
192  
193 &gpio {
194 pinctrl-names = "default";
195 pinctrl-0 = <&state_default>;
196  
197 state_default: pinmux {
198 mdio {
199 lantiq,groups = "mdio";
200 lantiq,function = "mdio";
201 };
202  
203 nand {
204 lantiq,groups = "nand cle", "nand ale",
205 "nand rd", "nand cs1", "nand rdy";
206 lantiq,function = "ebu";
207 lantiq,pull = <1>;
208 };
209  
210 phy-rst {
211 lantiq,pins = "io37", "io44";
212 lantiq,pull = <0>;
213 lantiq,open-drain = <0>;
214 lantiq,output = <1>;
215 };
216  
217 pcie-rst {
218 lantiq,pins = "io21";
219 lantiq,pull = <0>;
220 lantiq,output = <1>;
221 };
222 };
223  
224 pins_spi_default: pins_spi_default {
225 spi_in {
226 lantiq,groups = "spi_di";
227 lantiq,function = "spi";
228 };
229  
230 spi_out {
231 lantiq,groups = "spi_do", "spi_clk",
232 "spi_cs4";
233 lantiq,function = "spi";
234 lantiq,output = <1>;
235 };
236 };
237 };
238  
239 &pcie0 {
240 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
241  
242 pcie@0 {
243 reg = <0 0 0 0 0>;
244 #interrupt-cells = <1>;
245 #size-cells = <2>;
246 #address-cells = <3>;
247 device_type = "pci";
248  
249 wifi@0,0 {
250 compatible = "pci0,0";
251 reg = <0 0 0 0 0>;
252 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
253 };
254 };
255 };
256  
257 &spi {
258 status = "okay";
259  
260 pinctrl-names = "default";
261 pinctrl-0 = <&pins_spi_default>;
262  
263 m25p80@4 {
264 #address-cells = <1>;
265 #size-cells = <1>;
266 compatible = "jedec,spi-nor";
267 reg = <4 0>;
268 spi-max-frequency = <1000000>;
269  
270 urlader: partition@0 {
271 reg = <0x0 0x20000>;
272 label = "urlader";
273 read-only;
274 };
275  
276 partition@20000 {
277 reg = <0x20000 0x10000>;
278 label = "tffs (1)";
279 read-only;
280 };
281  
282 partition@30000 {
283 reg = <0x30000 0x10000>;
284 label = "tffs (2)";
285 read-only;
286 };
287 };
288 };
289  
290 &usb_phy0 {
291 status = "okay";
292 };
293  
294 &usb_phy1 {
295 status = "okay";
296 };
297  
298 &usb0 {
299 status = "okay";
300 vbus-supply = <&usb0_vbus>;
301 };
302  
303 &usb1 {
304 status = "okay";
305 vbus-supply = <&usb1_vbus>;
306 };