OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "amazonse.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6  
7 / {
8 compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
9 model = "Netgear DGN1000B";
10  
11 chosen {
12 bootargs = "console=ttyLTQ0,115200";
13 };
14  
15 aliases {
16 led-boot = &power;
17 led-failsafe = &power;
18 led-running = &power;
19 led-upgrade = &power;
20  
21 led-dsl = &dsl;
22 led-internet = &online_green;
23 };
24  
25 memory@0 {
26 reg = <0x0 0x1000000>;
27 };
28  
29 gpio-keys-polled {
30 compatible = "gpio-keys-polled";
31 #address-cells = <1>;
32 #size-cells = <0>;
33 poll-interval = <100>;
34  
35 reset {
36 label = "reset";
37 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RESTART>;
39 };
40 rfkill {
41 label = "rfkill";
42 gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RFKILL>;
44 };
45 wps {
46 label = "wps";
47 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_WPS_BUTTON>;
49 };
50 };
51  
52 gpio-leds {
53 compatible = "gpio-leds";
54 dsl: dsl {
55 label = "dgn1000b:green:dsl";
56 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
57 default-state = "on";
58 };
59 online_green: online {
60 label = "dgn1000b:green:online";
61 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
62 default-state = "on";
63 };
64 online2 {
65 label = "dgn1000b:red:online";
66 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
67 default-state = "on";
68 };
69 wps {
70 label = "dgn1000b:green:wps";
71 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
72 default-state = "on";
73 };
74 power: power {
75 label = "dgn1000b:green:power";
76 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
77 default-state = "keep";
78 };
79 /*
80 power red is missing
81 */
82 };
83 };
84  
85 &gpio {
86 pinctrl-names = "default";
87 pinctrl-0 = <&state_default>;
88  
89 state_default: pinmux {
90 asc {
91 lantiq,groups = "asc";
92 lantiq,function = "asc";
93 };
94 keys_in {
95 lantiq,pins = "io0",/* "io25", */"io29";
96 lantiq,pull = <2>;
97 lantiq,open-drain = <1>;
98 };
99 };
100 pins_spi_default: pins_spi_default {
101 spi_in {
102 lantiq,groups = "spi_di";
103 lantiq,function = "spi";
104 };
105 spi_out {
106 lantiq,groups = "spi_do", "spi_clk",
107 "spi_cs1";
108 lantiq,function = "spi";
109 lantiq,output = <1>;
110 };
111 };
112 };
113  
114 &gsw {
115 phy-mode = "mii";
116 mac-address = [ 00 11 22 33 44 55 ];
117 };
118  
119 &spi {
120 status = "okay";
121 pinctrl-names = "default";
122 pinctrl-0 = <&pins_spi_default>;
123  
124 m25p80@1 {
125 #address-cells = <1>;
126 #size-cells = <1>;
127 compatible = "jedec,spi-nor";
128 reg = <1 0>;
129 spi-max-frequency = <5000000>;
130  
131 partitions {
132 compatible = "fixed-partitions";
133 #address-cells = <1>;
134 #size-cells = <1>;
135  
136 partition@0 {
137 reg = <0x0 0x20000>;
138 label = "SPI (RO) U-Boot Image";
139 read-only;
140 };
141  
142 partition@20000 {
143 reg = <0x20000 0x10000>;
144 label = "ENV_MAC";
145 read-only;
146 };
147  
148 partition@30000 {
149 reg = <0x30000 0x10000>;
150 label = "DPF";
151 read-only;
152 };
153  
154 partition@40000 {
155 reg = <0x40000 0x10000>;
156 label = "NVRAM";
157 read-only;
158 };
159  
160 partition@500000 {
161 reg = <0x50000 0x003a0000>;
162 label = "kernel";
163 };
164 };
165 };
166 };
167  
168 &usb_phy {
169 status = "okay";
170 };
171  
172 &usb {
173 status = "okay";
174 };