OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "vr9.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7  
8 / {
9 compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
10 model = "BT OpenReach VDSL Modem";
11  
12 chosen {
13 bootargs = "console=ttyLTQ0,115200";
14 };
15  
16 aliases {
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
21  
22 led-dsl = &dsl;
23 };
24  
25 memory@0 {
26 reg = <0x0 0x2000000>;
27 };
28  
29 gpio-keys-polled {
30 compatible = "gpio-keys-polled";
31 #address-cells = <1>;
32 #size-cells = <0>;
33 poll-interval = <100>;
34  
35 reset {
36 label = "reset";
37 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RESTART>;
39 };
40 };
41  
42 gpio-leds {
43 compatible = "gpio-leds";
44  
45 dsl: dsl {
46 label = "asl56026:green:dsl";
47 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
48 };
49  
50 /* power-* is a bicolour led */
51 power_green: power_green {
52 label = "asl56026:green:power";
53 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
54 default-state = "keep";
55 };
56  
57 power_red: power_red {
58 label = "asl56026:red:power";
59 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
60 };
61 };
62  
63 gpio_export {
64 compatible = "gpio-export";
65 #size-cells = <0>;
66  
67 power_led_blink {
68 gpio-export,name = "power_led_blink";
69 gpio-export,output = <0>;
70 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
71 };
72 };
73 };
74  
75 &eth0 {
76 lan: interface@0 {
77 compatible = "lantiq,xrx200-pdi";
78 #address-cells = <1>;
79 #size-cells = <0>;
80 reg = <0>;
81 lantiq,switch;
82  
83 ethernet@2 {
84 compatible = "lantiq,xrx200-pdi-port";
85 reg = <2>;
86 phy-mode = "mii";
87 phy-handle = <&phy11>;
88 };
89  
90 ethernet@3 {
91 compatible = "lantiq,xrx200-pdi-port";
92 reg = <3>;
93 phy-mode = "mii";
94 phy-handle = <&phy14>;
95 };
96 };
97  
98 mdio@0 {
99 #address-cells = <1>;
100 #size-cells = <0>;
101 compatible = "lantiq,xrx200-mdio";
102 reg = <0>;
103  
104 phy11: ethernet-phy@11 {
105 reg = <0x11>;
106 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
107 };
108  
109 phy14: ethernet-phy@14 {
110 reg = <0x14>;
111 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
112 };
113 };
114 };
115  
116 &gphy0 {
117 lantiq,gphy-mode = <GPHY_MODE_FE>;
118 };
119  
120 &gphy1 {
121 lantiq,gphy-mode = <GPHY_MODE_FE>;
122 };
123  
124 &gpio {
125 pinctrl-names = "default";
126 pinctrl-0 = <&state_default>;
127  
128 state_default: pinmux {
129 mdio {
130 lantiq,groups = "mdio";
131 lantiq,function = "mdio";
132 };
133 };
134 };
135  
136 &localbus {
137 nor@0 {
138 compatible = "lantiq,nor";
139 bank-width = <2>;
140 reg = <0 0x0 0x0800000>;
141 #address-cells = <1>;
142 #size-cells = <1>;
143  
144 partitions {
145 compatible = "fixed-partitions";
146 #address-cells = <1>;
147 #size-cells = <1>;
148  
149 partition@0 {
150 label = "uboot";
151 reg = <0x0 0x30000>;
152 };
153  
154 partition@30000 {
155 label = "uboot_env";
156 reg = <0x30000 0x10000>;
157 };
158  
159 partition@40000 {
160 label = "firmware";
161 reg = <0x40000 0x750000>;
162 };
163  
164 partition@790000 {
165 label = "ddrconfig";
166 reg = <0x790000 0x70000>;
167 read-only;
168 };
169 };
170 };
171 };