OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "bcm6368.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6  
7 / {
8 model = "Comtrend WAP-5813n";
9 compatible = "comtrend,wap-5813n", "brcm,bcm6368";
10  
11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
14 };
15  
16 keys {
17 compatible = "gpio-keys-polled";
18 #address-cells = <1>;
19 #size-cells = <0>;
20 poll-interval = <20>;
21  
22 wlan {
23 label = "wlan";
24 gpios = <&pinctrl 32 1>;
25 linux,code = <KEY_WLAN>;
26 debounce-interval = <60>;
27 };
28  
29 reset {
30 label = "reset";
31 gpios = <&pinctrl 34 1>;
32 linux,code = <KEY_RESTART>;
33 debounce-interval = <60>;
34 };
35  
36 wps {
37 label = "wps";
38 gpios = <&pinctrl 35 1>;
39 linux,code = <KEY_WPS_BUTTON>;
40 debounce-interval = <60>;
41 };
42 };
43  
44 leds {
45 compatible = "gpio-leds";
46  
47 inet_green {
48 label = "WAP-5813n:green:inet";
49 gpios = <&pinctrl 5 0>;
50 };
51 power_green {
52 label = "WAP-5813n:green:power";
53 gpios = <&pinctrl 22 0>;
54 default-state = "on";
55 };
56 wps_green {
57 label = "WAP-5813n:green:wps";
58 gpios = <&pinctrl 23 1>;
59 };
60 power_red {
61 label = "WAP-5813n:red:power";
62 gpios = <&pinctrl 24 0>;
63 };
64 inet_red {
65 label = "WAP-5813n:red:inet";
66 gpios = <&pinctrl 31 0>;
67 };
68 };
69 };
70  
71 &pflash {
72 status = "ok";
73  
74 partitions {
75 compatible = "fixed-partitions";
76 #address-cells = <1>;
77 #size-cells = <1>;
78  
79 cfe@0 {
80 label = "CFE";
81 reg = <0x000000 0x010000>;
82 read-only;
83 };
84  
85 linux@10000 {
86 label = "linux";
87 reg = <0x010000 0x7e0000>;
88 compatible = "brcm,bcm963xx-imagetag";
89 };
90  
91 nvram@7f0000 {
92 label = "nvram";
93 reg = <0x7f0000 0x010000>;
94 };
95 };
96 };
97  
98 &lsspi {
99 switch@0 {
100 compatible = "brcm,bcm53115";
101 reg = <0>;
102 spi-max-frequency = <781000>;
103  
104 lede,alias = "eth0";
105  
106 ports {
107 #address-cells = <1>;
108 #size-cells = <0>;
109  
110 lan@0 {
111 reg = <0>;
112 label = "lan4";
113 };
114  
115 lan@1 {
116 reg = <1>;
117 label = "lan3";
118 };
119  
120 lan@2 {
121 reg = <2>;
122 label = "lan2";
123 };
124  
125 lan@3 {
126 reg = <3>;
127 label = "lan1";
128 };
129  
130 wan@4 {
131 reg = <4>;
132 label = "wan";
133 };
134  
135 cpu@5 {
136 reg = <5>;
137 label = "cpu";
138  
139 fixed-link {
140 speed = <1000>;
141 full-duplex;
142 asym-pause;
143 pause;
144 };
145 };
146 };
147 };
148 };
149  
150 &pinctrl {
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_pci>;
153 };
154  
155 &uart0 {
156 status = "ok";
157 };