OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 /dts-v1/;
2  
3 #include "bcm63268.dtsi"
4  
5 #include <dt-bindings/input/input.h>
6  
7 / {
8 model = "SKY SR102";
9 compatible = "sky,sr102", "brcm,bcm63268";
10  
11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
14 };
15  
16 keys {
17 compatible = "gpio-keys-polled";
18 #address-cells = <1>;
19 #size-cells = <0>;
20 poll-interval = <20>;
21  
22 wps {
23 label = "wps";
24 gpios = <&pinctrl 33 0>;
25 linux,code = <KEY_WPS_BUTTON>;
26 debounce-interval = <60>;
27 };
28 };
29  
30 leds {
31 compatible = "gpio-leds";
32  
33 lan1_green {
34 label = "SR102:green:lan1";
35 gpios = <&pinctrl 1 1>;
36 };
37 power_red {
38 label = "SR102:red:power";
39 gpios = <&pinctrl 2 1>;
40 };
41 wifi_red {
42 label = "SR102:red:wifi";
43 gpios = <&pinctrl 3 1>;
44 };
45 inet_red {
46 label = "SR102:red:inet";
47 gpios = <&pinctrl 4 1>;
48 };
49 inet_white {
50 label = "SR102:white:inet";
51 gpios = <&pinctrl 5 0>;
52 };
53 power_white {
54 label = "SR102:white:power";
55 gpios = <&pinctrl 6 0>;
56 default-state = "on";
57 };
58 wifi_white {
59 label = "SR102:white:wifi";
60 gpios = <&pinctrl 8 0>;
61 };
62 lan2_red {
63 label = "SR102:red:lan2";
64 gpios = <&pinctrl 9 1>;
65 };
66 lan3_red {
67 label = "SR102:red:lan3";
68 gpios = <&pinctrl 10 1>;
69 };
70 lan4_red {
71 label = "SR102:red:lan4";
72 gpios = <&pinctrl 11 1>;
73 };
74 lan1_red {
75 label = "SR102:red:lan1";
76 gpios = <&pinctrl 12 1>;
77 };
78 lan2_green {
79 label = "SR102:green:lan2";
80 gpios = <&pinctrl 13 0>;
81 };
82 lan3_green {
83 label = "SR102:green:lan3";
84 gpios = <&pinctrl 14 1>;
85 };
86 lan4_green {
87 label = "SR102:green:lan4";
88 gpios = <&pinctrl 15 1>;
89 };
90 hd_white {
91 label = "SR102:white:hd";
92 gpios = <&pinctrl 18 0>;
93 };
94 };
95 };
96  
97 &hsspi {
98 status = "ok";
99  
100 flash@0 {
101 compatible = "jedec,spi-nor";
102 spi-max-frequency = <16666667>;
103 spi-tx-bus-width = <2>;
104 spi-rx-bus-width = <2>;
105 reg = <0>;
106  
107 #address-cells = <1>;
108 #size-cells = <1>;
109  
110 partitions {
111 compatible = "brcm,bcm963xx-cfe-nor-partitions";
112 };
113 };
114 };
115  
116 &uart0 {
117 status = "ok";
118 };