OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "qca953x.dtsi"
8  
9 / {
10 compatible = "glinet,gl-x750", "qca,qca9531";
11 model = "GL.iNet GL-X750";
12  
13 keys {
14 compatible = "gpio-keys-polled";
15  
16 poll-interval = <20>;
17 pinctrl-names = "default";
18 pinctrl-0 = <&jtag_disable_pins>;
19  
20 button0 {
21 label = "reset";
22 linux,code = <KEY_RESTART>;
23 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
24 };
25 };
26  
27 leds {
28 compatible = "gpio-leds";
29  
30 power {
31 label = "gl-x750:green:power";
32 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
33 default-state = "on";
34 };
35  
36 wlan2g {
37 label = "gl-x750:green:wlan2g";
38 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
39 linux,default-trigger = "phy1tpt";
40 };
41  
42 wlan5g {
43 label = "gl-x750:green:wlan5g";
44 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
45 linux,default-trigger = "phy0tpt";
46 };
47  
48 wan {
49 label = "gl-x750:green:wan";
50 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
51 };
52  
53 4g {
54 label = "gl-x750:green:4g";
55 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
56 };
57 };
58 };
59  
60 &pcie0 {
61 status = "okay";
62 };
63  
64 &uart {
65 status = "okay";
66 };
67  
68 &usb0 {
69 #address-cells = <1>;
70 #size-cells = <0>;
71 status = "okay";
72  
73 hub_port: port@1 {
74 reg = <1>;
75 #trigger-source-cells = <0>;
76 };
77 };
78  
79 &usb_phy {
80 status = "okay";
81 };
82  
83 &spi {
84 status = "okay";
85 num-cs = <0>;
86  
87 flash@0 {
88 compatible = "jedec,spi-nor";
89 reg = <0>;
90 spi-max-frequency = <25000000>;
91  
92 partitions {
93 compatible = "fixed-partitions";
94 #address-cells = <1>;
95 #size-cells = <1>;
96  
97 partition@0 {
98 label = "u-boot";
99 reg = <0x000000 0x040000>;
100 read-only;
101 };
102  
103 partition@40000 {
104 label = "u-boot-env";
105 reg = <0x040000 0x010000>;
106 };
107  
108 art: partition@50000 {
109 label = "art";
110 reg = <0x050000 0x010000>;
111 };
112  
113 partition@60000 {
114 compatible = "denx,uimage";
115 label = "firmware";
116 reg = <0x060000 0xfa0000>;
117 };
118 };
119 };
120 };
121  
122 &eth0 {
123 status = "okay";
124 mtd-mac-address = <&art 0x0>;
125 phy-handle = <&swphy4>;
126 };
127  
128 &eth1 {
129 mtd-mac-address = <&art 0x0>;
130 mtd-mac-address-increment = <1>;
131 };
132  
133 &wmac {
134 status = "okay";
135 mtd-cal-data = <&art 0x1000>;
136 mtd-mac-address = <&art 0x1002>;
137 };