OpenWrt – Blame information for rev 2

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "ar9344.dtsi"
8  
9 / {
10 model = "PowerCloud Systems CAP324";
11 compatible = "pcs,cap324", "qca,ar9344";
12  
13 aliases {
14 serial0 = &uart;
15 led-boot = &status;
16 led-failsafe = &status;
17 led-running = &running;
18 led-upgrade = &status;
19 };
20  
21 keys {
22 compatible = "gpio-keys-polled";
23 poll-interval = <20>;
24  
25 pinctrl-names = "default";
26 pinctrl-0 = <&jtag_disable_pins>;
27  
28 reset {
29 label = "Reset button";
30 linux,code = <KEY_RESTART>;
31 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
32 debounce-interval = <60>;
33 };
34 };
35  
36 leds {
37 compatible = "gpio-leds";
38  
39 status: power_amber {
40 label = "pcs:amber:power";
41 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
42 };
43  
44 running: power_green {
45 label = "pcs:green:power";
46 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
47 default-state = "on";
48 };
49  
50 wlan_amber {
51 label = "pcs:amber:wlan";
52 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
53 linux,default-trigger = "phy1tpt";
54 };
55  
56 wlan_green {
57 label = "pcs:green:wlan";
58 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
59 linux,default-trigger = "phy0tpt";
60 };
61  
62 lan_amber {
63 label = "pcs:lan:amber";
64 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
65 };
66  
67 lan_green {
68 label = "pcs:lan:green";
69 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
70 };
71 };
72 };
73  
74 &ref {
75 clock-frequency = <25000000>;
76 };
77  
78 &uart {
79 status = "okay";
80 };
81  
82 &gpio {
83 status = "okay";
84 };
85  
86 &spi {
87 num-cs = <1>;
88  
89 status = "okay";
90  
91 flash@0 {
92 compatible = "jedec,spi-nor";
93 reg = <0>;
94 spi-max-frequency = <25000000>;
95  
96 partitions {
97 compatible = "fixed-partitions";
98 #address-cells = <1>;
99 #size-cells = <1>;
100  
101 uboot: partition@0 {
102 label = "u-boot";
103 reg = <0x000000 0x040000>;
104 read-only;
105 };
106  
107 partition@40000 {
108 label = "u-boot-env";
109 reg = <0x040000 0x010000>;
110 read-only;
111 };
112  
113 partition@50000 {
114 compatible = "denx,uimage";
115 label = "firmware";
116 reg = <0x050000 0x0fa0000>;
117 };
118  
119 art: partition@7f0000 {
120 label = "art";
121 reg = <0xff0000 0x010000>;
122 read-only;
123 };
124 };
125 };
126 };
127  
128 &pcie {
129 status = "okay";
130  
131 ath9k: wifi@0,0 {
132 compatible = "168c,0030";
133 reg = <0x0000 0 0 0 0>;
134 mtd-mac-address = <&art 0x0>;
135 mtd-mac-address-increment = <(-2)>;
136 mtd-cal-data = <&art 0x5000>;
137 qca,no-eeprom;
138 qca,disable-5ghz;
139 #gpio-cells = <2>;
140 gpio-controller;
141 };
142 };
143  
144 &wmac {
145 status = "okay";
146  
147 qca,disable-2ghz;
148 mtd-cal-data = <&art 0x1000>;
149 mtd-mac-address = <&art 0x0>;
150 mtd-mac-address-increment = <(-1)>;
151 };
152  
153 &mdio0 {
154 status = "okay";
155  
156 phy-mask = <0>;
157  
158 phy0: ethernet-phy@0 {
159 reg = <0>;
160 phy-mode = "rgmii";
161 };
162 };
163  
164 &eth0 {
165 status = "okay";
166  
167 /* default for ar934x, except for 1000M */
168 pll-data = <0x06000000 0x00000101 0x00001616>;
169  
170 mtd-mac-address = <&art 0x0>;
171  
172 phy-mode = "rgmii";
173 phy-handle = <&phy0>;
174 };