OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "ar9331.dtsi"
8  
9 / {
10 compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
11 model = "TP-Link TL-WR741N/ND v4";
12  
13 aliases {
14 serial0 = &uart;
15 led-boot = &system;
16 led-failsafe = &system;
17 led-running = &system;
18 led-upgrade = &system;
19 };
20  
21 keys {
22 compatible = "gpio-keys-polled";
23 poll-interval = <20>;
24  
25 reset {
26 label = "reset";
27 linux,code = <KEY_RESTART>;
28 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
29 debounce-interval = <60>;
30 };
31  
32 wps {
33 label = "wps";
34 linux,code = <KEY_WPS_BUTTON>;
35 gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
36 debounce-interval = <60>;
37 };
38 };
39  
40 leds {
41 compatible = "gpio-leds";
42 pinctrl-names = "default";
43 pinctrl-0 = <&switch_led_pins>;
44  
45 lan1 {
46 label = "tp-link:green:lan1";
47 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
48 };
49  
50 lan2 {
51 label = "tp-link:green:lan2";
52 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
53 };
54  
55 lan3 {
56 label = "tp-link:green:lan3";
57 gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
58 };
59  
60 lan4 {
61 label = "tp-link:green:lan4";
62 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
63 };
64  
65 qss {
66 label = "tp-link:green:qss";
67 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
68 };
69  
70 system: system {
71 label = "tp-link:green:system";
72 gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
73 };
74  
75 wan {
76 label = "tp-link:green:wan";
77 gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
78 };
79  
80 wlan {
81 label = "tp-link:green:wlan";
82 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
83 linux,default-trigger = "phy0tpt";
84 };
85 };
86 };
87  
88 &spi {
89 status = "okay";
90 num-cs = <1>;
91  
92 flash@0 {
93 compatible = "jedec,spi-nor";
94 reg = <0>;
95 spi-max-frequency = <25000000>;
96  
97 partitions {
98 compatible = "fixed-partitions";
99 #address-cells = <1>;
100 #size-cells = <1>;
101  
102 uboot: partition@0 {
103 reg = <0x0 0x20000>;
104 label = "u-boot";
105 read-only;
106 };
107  
108 firmware: partition@20000 {
109 compatible = "tplink,firmware";
110 reg = <0x20000 0x3d0000>;
111 label = "firmware";
112 };
113  
114 art: partition@3f0000 {
115 reg = <0x3f0000 0x10000>;
116 label = "art";
117 read-only;
118 };
119 };
120 };
121 };
122  
123 &eth0 {
124 status = "okay";
125  
126 mtd-mac-address = <&uboot 0x1fc00>;
127 mtd-mac-address-increment = <1>;
128  
129 gmac-config {
130 device = <&gmac>;
131  
132 switch-phy-addr-swap = <1>;
133 switch-phy-swap = <1>;
134 };
135 };
136  
137 &eth1 {
138 status = "okay";
139  
140 mtd-mac-address = <&uboot 0x1fc00>;
141 mtd-mac-address-increment = <(-1)>;
142 };
143  
144 &gpio {
145 status = "okay";
146 };
147  
148 &uart {
149 status = "okay";
150 };
151  
152 &wmac {
153 status = "okay";
154 mtd-cal-data = <&art 0x1000>;
155 mtd-mac-address = <&uboot 0x1fc00>;
156 };